|
Flush-floor platform for axle weighing stations.
|
|
|
|
Reinforced platform for stationary or in-motion axle weighing.
RWSCP: installation example, with a well leveled concrete surface.
|
|
|
Reinforced platform which allows to calculate the weight of a vehicle in transit, adding up the various axles, weighed when stationary or in motion. Designed for flush floor installation. CE approved according to Directive 2014/31/EU for verification of the axle weight.  |  |  | Technical features |
|  | - Loading surface made of lobed sheet metal, sized to support any load according to the parameters dictated by the Directive 96/53/EC (maximum load on single axle for vehicles in transit in Europe).
- Frame for containing the RWSCP platform, consisting of a single load-bearing structure, in welded painted steel, which does not require assembly. Facilitates scale installation operations and simplifies masonry work.
- Sandblasting process and painting with bi-component epoxy primer, with very high resistance to corrosion.
- Dimensions of the loading surface (lxw): 3 x 0.73 m.
- 6 compression load cells, class C3, in IP68 stainless steel.
- 20m cable for connection to weight indicator.
- Dust and water proof wiring and connections, easy to connect and disconnect.
- Hermetic junction box.
- Central hatch for inspection and routine maintenance.
- Wide range of connectable weight indicators, also with rechargeable battery functioning, which allow the use of the scale also without power supply.
- Maximum transit speed: 5km/h.
- Accuracy 1% for internal use, 2% for legal-for-trade use.
These accuracies are obtainable by following the mounting specifications and the instructions provided in the installation manual.
|
|
|
Available versions
| Code | l x w x h (mm) | Nr. of cells | Max (kg) | d (kg) |
| RWSCP20T-1 | 3000x730 | 6 x 5000kg | 20000 | 5 |
| RWSCP40T-1 | 3000x730 | 6 x 10000kg | 40000 | 10 |
| RWSCP50T-1 | 3000x730 | 6 x 12500kg | 50000 | 20 |
Application scheme for flush floor installation
Legal for trade approval
(only at time of order)
| Code | Description |
 | ECEM-AXLE | CE approval for axle weighing system with WWS / RWS and 3590 Touch Screen, with AF09 weighing program. |
Calibration service with weight indicator
| Code | Description |
 | DINICAL | Connection to a Dini Argeo indicator and calibration. NET PRICE. |
Bars for facilitated installation
| Code | Description |
| RWSAI | Kit made up of 2 level bars for RWS installation. |
Protection for junction box/electronic circuits
| Code | Description |
 | GELBOX a> | (S1) Anti condensation, insulating, and sealing gel. Useful to protect the electronic circuits of the weighing system, even under prolonged immersions conditions. Pack of 300ml. |
WARNING:
For JB10Q/JB10QD: 1200ml of gel required
3590E weight indicator in "AF09" version, OIML R134 certified
| Code | Description |
 | 3590EGTBOX8 a> | Column or wall STAINLESS steel kiosk fitted with weight indicator, 8" touchscreen display and AF03GT software for vehicle weighing and weighbridge management. Equipped with thermal printer and RFID reader. |
 | 3590EGT8 a> | 8-inch Touch Screen indicator with stainless steel IP68 case. Tilting version with stainless steel support for bench/wall installation. Internal Ethernet port as standard. Fitted with AF01 software as standard. |
 | 3590EGT a> | Colour Touch Screen indicator with AF01 software. Stainless steel IP68 case. |
 | 3590ET a> | Touch screen indicator with AF01 software. ABS enclosure. Colour Display. |
 | AF09 a> | Software for dynamic and static axle weighing with 1 or 2 pads. |
Communication Interfaces
| Code | Description |
 | SETHDIN-1 a> | RS232 / RS485 / Ethernet converter. Modbus RTU / Modbus TCP/IP (if applicable). Connectable to all Dini Argeo weight indicators via the serial port. ABS housing for DIN rail. With PCB, screw terminals, plastic box and UL marked labels (if applicable). |
 | ETHD a> | (S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols. |
 | OBRF-2 a> | (S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. |
 | OBRFUSB-3 a> | External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. |
 | RS485C | (S1) Built-in RS485 interface (mounting and cable gland excluded). |
 | RS485OPTO | (S1) Built-in optoisolated RS485 interface (mounting and cable gland excluded). |
 | C2IN | (S1) Set of 2 optoisolated inputs (mounting and cable gland excluded). |
 | C4OUT | (S1) Set of 4 optoisolated outputs (mounting and cable gland excluded). |
Storing the weighs (only at time of order)
| Code | Description |
 | USBC-1 a> | (S1) Built-in USB port kit for data storing on USB key. Fitted with USB key for PC. |
 | USBEGT a> | Built-in USB port to store data on a USB driver. To be combined with touchscreen weight indicators. It does not occupy serial ports. Fitted with USB key for PC. TAKE NOTE: this interface cannot be ordered separately and is to be combined with a weight indicator as part of the order. |
 | USBK | (S1) Set of 5 USB keys for recording the weighs. |
 | SWM a> | "WeiMonitor" PC program to monitor and record in real time weighs performed on the connected scale (the price is intended for the license to manage one scale). |
Calibration service with Dini Argeo indicator (only at time of order)
| Code | Description |
 | CD5 | ISO 9001 DINI ARGEO calibration report, from 15001 a 60000kg. For WBSA, DTW and RWS. ACCREDIA reference weights. |
Accessories for post-installation finishing
| Code | Description |
| RAL3009 | Spray paint can RAL 3009, of 400ml, for DTW and RWS post-installation finishing. |