Interfaces





"ETHD": ETHERNET INTERFACE FOR INDICATORS


  "ETHD": ETHERNET INTERFACE FOR INDICATORS
 

ETHERNET interface for internal installation
Programming accessible by the integrated web interface.
It does not require any other pc application for the configuration.
Small size, excellent signal quality, support of the most common network protocols are just a few features of this product, which allows for a network connection of any scale or weighing system to the company’s computer system through the RJ45 connector; it’ easy to install and it’s fitted with a cable for the connection to the indicators
The module does not exclude the use of other Dini Argeo products on the system, such as Control Light, Alibi Memory, attached or external printer.

TECHNICAL FEATURES

  • Connection to the mains through the standard RJ45 connector
  • Mains interface: 10/100 Base-T
  • Supported protocols: TCP, UDP, DHCP, HTTP, ICMP, uPnP, ARP
  • Size: Height = 50 mm; Width = 87 mm.
  • Visual indications: 2 LEDs
    - Green LED: ON when it is connected to the 10/100 Base-T mains.
    - Yellow LED: ON in the presence of the mains activity.
  • Operating temperature: -20°C +85°C
  • Power supply: from 5 to 12Vdc
  • Max. absorption: 350 mA.


    The accessory may be ordered only combined with a suitable weight indicator.
    In case of installation in existing systems, it is recommended to consult the manual to verify compatibility with devices in use.
DOWNLOAD
Interface and Cable
 CodeDescription
ETHD Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.


Pdf product page All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS
Dini Argeo is a company of
Rice Lake Weighing Systems		 Copyright - All Rights Reserved - 27/04/2024
Dini Argeo S.r.l. - P.IVA/VAT IT00767800360 Privacy Policy