|
Indicators
|
3590ED "COLOUR": EVOLVED WEIGHT INDICATOR WITH 40mm DISPLAY
|
|
3590ED "COLOUR": EVOLVED WEIGHT INDICATOR WITH 40mm DISPLAY
|
|
| |
|
|
3590ED: Weight indicator with 40mm very intense bright LEDs.
|
 | | | I/O SECTION |
| | - 2 RS232 serial ports, for connection to printer, PC or PLC, radio module and optinal interfaces.
- 1 RS232 serial port (optional RS485), for connection to weight repeater, remote scale, badge reader.
- Fitted keyboard emulation input, for barcode/badge readers or external PC keyboard, through cable with mini DIN connector (optional).
- 4 optoisolated outputs (optional).
- 2 optoisolated inputs (optional).
- External Profibus interface (optional), for automation management.
- Modbus RTU protocol.
- Optional Bluetooth connection, for quick wireless programming of the activities and the formulas, through PC, tablet or smartphone.
|
|
|
Digital weight indicator, with high performance 40mm RGB and very intense bright display, for a clear visibility in any environment, indoor or outdoor, thanks to colour and brightness freely configurables. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory and port for connection to barcode/badge reader. The wide range of connectable accessories and printers guarantees the maximum interfaceability and versatility. CE-M approvable (OIML R-76 / EN 45501). | | | MAIN FEATURES |
| | - 25-key alphanumerical waterproof keyboard.
- Very intense bright dot LED RGB, h=40mm, with intensity and colour quickly configurable through the keyboard.
- Backlit LCD graphic 25x100mm display.
- Easy to clean STAINLESS STEEL waterproof IP68 enclosure; resistant to harsh and corrosive environments.
- Dimensions: 280x132x185 mm.
- Suitable for use on the table, column, or wall.
- Real time clock and permanent data storage.
- Fitted alibi memory, integrated on the motherboard.
- Functions available with DINITOOLS utility
- Configuration, calibration, data entry and print formatting.
- Recording and filing of all the information on PC.
- Complete retrieval of the data saved for quick substitution.
- Instrument calibration with numeric values. - Selection of the programme language directly in the set-up.
- 24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points.
- 4 independent analogue channels (up to 2 in the E-AF03 version, 1 in the E-AF09 version) for reading of the weight.
- Management of 16 analog load cells of 350 Ohm (45 cells at 1000 Ohm);
NOTE: for the management of digital load cells for weigh bridges, see the range of touchscreen indicators. - Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/e CE-M legal for trade.
- Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points.
- Connectable to printers and labellers with the command drivers.
- 110-240 Vac power supply.
|
|
|
Available versions
| | Code | Description |
 | 3590ED | Indicator with AF01 software. IP68 stainless steel case, 40 mm display. |
Optional power supply cords
| | Code | Description |
 | PWCORDUK | Version with BS1363 power cord (UK plug). |
 | PWCORDCH | Power supply cord with SEV1011 plug (CH plug). |
 | PWCORDUS | Version with US type B power cord (Japan, North and Central America). |
 | PWCORDAUS | Version with AU power cord. |
Available firmwares
| | Code | Description |
 | AF02 | Software for piece/quantity counting. |
 | AF03 | Software for weighbridges, input/output vehicle. For 3590 and CPW weight indicators. |
 | AF04 | Software for statistical checking of prepackaged goods. |
 | AF05 | Software for price computing and industrial labelling. |
 | AF08 | Software for static wheel and axle weighing with 2 or more pads. |
 | AF09 | Software for dynamic and static axle weighing with 1 or 2 pads. |
 | BATCH1 | Software for single product dosage systems in loading and unloading. |
Software to fill in the databases
| | Code | Description |
 | DBM | PC software for quick filling out of the databases. For 3590Exx and CPWExx instruments (the price is intended for the license to manage one scale). |
Junction Box / Boards - Cell cables
| | Code | Description |
 | 3590E4CH | (S1) Built-in board for multiple quick scale connection. |
 | LCCBC | (S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered. |
 | LCCB5C | (S1) LCCBC cable + 5m extension cable. |
| LCCB10C | (S1) LCCBC cable + 10m extension cable. |
Legal for trade approval
| | Code | Description |
 | KCEM | Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination with a Dini Argeo indicator. |
Storing the weighs (only at time of order)
| | Code | Description |
 | USBC-1 | (S1) Built-in USB port kit for data storing on USB key. Fitted with USB key for PC. |
 | USBK | Set of 5 USB keys for recording the weighs. |
 | SWM | "WeiMonitor" PC program to monitor and record in real time weighs performed on the connected scale (the price is intended for the license to manage one scale). |
Printers/Labellers
| | Code | Description |
 | TPRXT | (S1) Attached stainless steel IP65 thermal printer. NOTE: incompatible with IOEXPB board.
Thermal paper roll included as standard. |
 | PR80-1 | (S1) Thermal printer with paper cutter. Paper roll not included. |
 | SMTPLUS-1 | (S1) Thermal transfer or direct termal labeller. Peel-off kit in option. Maximum print size 25400 x 108 mm. Maximum roll Ø 203 mm and width up to 118 mm.
Label roll and ribbon not included. |
 | SMTRPK-1 | (S1) Label peel-off and rewind kit for SMTPLUS-1 labeller. |
 | LP542TE | (S1) Thermal transfer or direct thermal labelling machine Supplied with standard peel mechanism. Maximum printing size 25400 x 108 mm. Maximum roll Ø 127 mm and width up to 112 mm.
Label roll and ribbon not included. |
 | LX300PRO | (S1) DotMatrix impact printer. Paper not included. |
 | TM295 | (S1) DotMatrix impact printer. Paper / Labels / Tags not included. |
 | RSCBLX | (S1) RS232 cable l=1,5m for LX300, TM295 printers. |
 | RSCBLP | (S1) RS232 cable l=1,5m for LP542xx, SMTPLUS, PR80 printers. |
| RSCBLP10M | (S1) RS232 cable l=10m for LP542xx, SMTPLUS, PR80 printers. |
 | PRNSERV | Custom-made ticket (up to 4 layouts). NET price. |
 | APRNSERV | Custom-made label (up to 4 layouts). NET price. |
Communication Interfaces
| | Code | Description |
 | RSCBUSBPG | (S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65, IP68 and IP69K protection system. |
 | RSCBUSB485 | USB cable converter PC/RS485, l=1,5m. With metallic PG9 cable gland.
To be combined with an indicator fitted with optional or standard RS485 output. |
 | OBRF2G4 | (S1) External 2.4 GHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 45 m indoors, 140m outdoors. 39 configurable channels. |
 | OBRF2G4-USB | External 2.4 GHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 45 m indoors, 140 outdoors. 39 configurable channels. |
 | WIFITPWLK-2 | (S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system. |
 | ETHD | (S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols. |
 | SETHNET | (S1) External RS232/Ethernet interface. Suitable for multi-location weighbridge systems networking. Compatible only with the AF03 software. |
 | PROFI232-1 | External RS232/RS485/PROFIBUS interface for DIN bar. Connectable to the indicators with Profibus protocol with PCB, terminal blocks, plastic box and UL-marked labels (if applicable). |
 | BLTH-3 | (S1) Built-in bluetooth interface. For wireless connection of the scale to tablets, smartphones, laptops or barcode scanners.
Attention: this interface is not suitable for Master-Slave systems. |
 | RS485C | (S1) Built-in RS485 interface (mounting and cable gland excluded). |
 | RS485OPTO | (S1) Built-in optoisolated RS485 interface (mounting and cable gland excluded). |
Connection cables
| | Code | Description |
 | RSCBRJ | (S1) RS232/C serial cable - DB9/RJ11 - l=1,5m. |
 | RSCBRJ10M | (S1) RS232/C serial cable - DB9/RJ11 - l=10m. |
 | ETHCBRJ | (S1) Ethernet cable, l=1,5m. Fitted with fairlead, for connection between indicator and PC network. |
Digital Input/Output
| | Code | Description |
 | C2IN | (S1) Set of 2 optoisolated inputs (mounting and cable gland excluded). |
 | C4OUT | (S1) Set of 4 optoisolated outputs (mounting and cable gland excluded). |
Weight repeaters
| | Code | Description |
 | GLR100 | RS485 alphanumeric repeater with 110 mm multicolour LED display. Complete with 10m RS485 cable with IP67 connector. |
 | DGT100R-1 | Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure. |
Columns and supports brackets
| | Code | Description |
 | STFI-1 | AISI 304 stainless steel fixing bracket. For weight indicator wall mounting. |
 | STFR-1 | AISI 304 stainless steel fixing bracket with adjustable inclination. For weight indicator wall mounting. |
 | KWR10 | Kit of 4 rubber wheels and galvanized steel frame for CSP column. A pair of idler wheels and a pair with brakes. |
 | CSP38I-1 | AISI 304 stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
|
 | CSP38 | Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range. |
 | CSP38D | Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range. |
Options for ATEX version
| | Code | Description |
 | ZBA1S | Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a flame-proof case. Marking: ATEX/IECEx II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
 | KZBA-1 | ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in a dangerous zone. Dimensions 179x359x166,5mm. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc X for gas, ATEX II 3(1)D Ex tc [ia Da] IIIC T135°C Dc IP66 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT). |
 | KMB4-1 | Kit of 3 ATEX Zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in a dangerous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT). |
 | DCATEXMB4 | ATEX declaration for the whole system with Dini Argeo Zener barriers. Ex II 2G IIC T6 Gb X e Ex II 2D IIIC T125°C Db X system, with label of the whole system, for weight indicator connected to Dini Argeo zener barriers, connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). Provided with descriptive document of the assembly and ATEX EU declaration of conformity of the assembly (EN and IT). |
 | JB4QA | ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
 | JB4QAI | ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
 | EXCB6 | (S6) Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m |
PC keyboard / Scanner / Connection cables
| | Code | Description |
 | KBCBCE | (S1) PC keyboard cable with mini DIN connector. |
 | PCKBRD | QWERTY PC keyboard (it needs a mini DIN cable). |
 | SCCDR2-1 | (S1) 1D optical barcode reader with stand. Power cable and RS232 communication cable with weight indicator and stainless steel cable gland included. |
 | SC2D | (S1) 1D/2D optical barcode reader with stand. Power cable and RS232 communication cable with weight indicator and stainless steel cable gland included. |
Protection against electric discharges
| | Code | Description |
 | 3590EEP | (S1) Built-in protection card against electric discharges according to IEC 1000-4-5/D (IEC 801-5/D). |
Keyboard protection cover
| | Code | Description |
 | CVRXT | Kit of 10 moulded protective covers in transparent plastic. For indicator 3590ED and 3590EGT. |
Remote control
| | Code | Description |
 | TLRP | (S1) Radio frequency remote control and receiver with extension, for installations where other option boards with connection to AMP are required. |
| TLRP | (S1) Radio frequency remote control and receiver with extension, for installations where other option boards with connection to AMP are required. |
PG cable glands
| | Code | Description |
 | PG7M | 10 PG7 metallic cable gland set for weight indicators. Complete with rings and gaskets. |
 | PG9M | 10 PG9 metallic cable gland set for weight indicators. Complete with rings and gaskets. |
| PG11M | 10 PG11 metallic cable gland set for weight indicators. |
| PG13M | 10 PG13 metallic cable gland set for weight indicators. |
 | PG9PG11C | Kit of 10 metalic IP68 from PG9 to PG11 adapters (ø max cable 12mm) |
| PG9PG13C | Kit of 10 metalic IP68 from PG9 to PG13 adapters (ø max cable 12mm) |
Accessories
| | Code | Description |
| TECSUP | Technical assistance by telephone upon request. |
| TECMAN | Printed technical manual (Free download from the website). |
| UMAN | Printed user manual (Free download from the website). |
| ECEMDOC | Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €. |
Pdf product page
All the specifications and images can be subject to variations and upgrades without prior notice.
|
|