Dini Argeo: Weighing Systems, Industrial scales, Mobile weighing, Weighing Indicators, Weighing modules, Load Cells, Scale House

Home Company Products Services Contacts News

Search:

Partners Area:

Partners Area

Username:

Password:

Stay signed in

DGTQ: DIGITAL WEIGHT TRANSMITTER/INDICATOR

Others:

Mobile weighing

Vehicle Weighing

Industrial scales

Weight Indicators

"ENTERPRISE" series

Weighing modules

Load Cells

Weighing in ATEX zones

Scale House: scales for laboratory, retail, warehouse

Helmac scales: retail, price computing machines

Cibe Laboratory: weights, weight sets, calibration services

Syntweb: application software, systems integration

	DGTQ: DIGITAL WEIGHT TRANSMITTER/INDICATOR

I/O SECTION

RS232/C bidirectional port configurable for connection with external units.
RS485 bi-directional port configurable for network connection.
Two 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs which may be configured as direct control or upon weight stability, with programmable weight thresholds (disable and enable thresholds).
2 configurable optoisolator photocoupler inputs: 12÷24 Vdc, 5 mA min - 20 mA max.
MODBUS serial protocol (DGTQ, DGTQAN).
With PROFIBUS serial interface (DGTQPB).
With 16-bit analogue output 4-20mA / 0-5Vdc / 0-10Vdc at choice; the maximum applicable voltage is 350 Ohm and the minimum applicable voltage resistance is 10 kohm (DGTQAN).

Multipurpose weight indicator/transmitter for panel mounting, 4 dependent or independent channels for direct reading and diagnostics of each connected load cell. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

Easy to use 5-key waterproof keyboard.
Highly efficient red LED display with 6 13-mm digits and 6 LEDs for showing active functions.
Case for panel mounting in Abs according to DIN standard, 96x96x80 mm (lxhxpx). Perforation 90x88 mm (lxh) for panel mounting.
Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS
Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d for CE-M approved legal for trade use.
Up to displayable 800.000d with internal resolution up to 3.000.000 points.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
Master/Slave management (up to 4 Slaves / 1 Master).
From 12 Vdc to 24 Vdc power supply.

FUNCTIONS

THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare; print and/or data transmission; ON/Stand-by; Weighs totalisation; Formulation; Net/Gross weight switch; Counting; Hold; Peak; kg/Lb conversion.
REMOTABLE FROM EXTERNAL INPUT:
Clearing; Semi automatic tare; Print and/or data transmission; Selected function command; ON/Stand-by.
UNIVERSAL WEIGHT REPEATER:
Connectable to any scale or PC through the RS232 or RS485 serial connection, with software configuration of the input data string.
THROUGH SERIAL LINE:
Reading of the net, gross, and tare weights, microvolts or ADC converter for all the channels; Clearing; Semi automatic and presettable tare; Scale switch; Printing; Message display; Setting of APW in piece counting; Setting of set points of the outputs; Simulation of key pressure; Reading/Writing of Alibi Memory.
THROUGH PROFIBUS (DGTQPB):
Reading of the net, gross, or tare weights; Clearing; Semi automatic tare; Scale switch; Setting of set points of the outputs; Reading/Writing of Alibi Memory.
THROUGH 16 bit ANALOGUE OUTPUT (DGTQAN):
Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

OPTIONS ONLY AVAILABLE AT TIME OF ORDER

Printer for panel mounting
Time/Date
Alibi Memory
Expansion for a total of 6 relays

Available versions

	Code	Description
	DGTQ	Weight indicator / Transmitter for panel mounting, with 5-key keypad and LED display.
	DGTQAN	Weight indicator / Transmitter for panel mounting, with 5-key keypad, LED display and analogue output.
	DGTQPB	Weight indicator / Transmitter for panel mounting, with 5-key keypad, LED display and PROFIBUS port.

Options only available at time of order

	Code	Description
	KCEM	Kit of plates and Welmec form for the approval of the system for legal for trade use, for each provided platform/weighing system, connected to Dini Argeo indicator.
	DCATEXMB4	Declaration of ATEX conformity of the whole, Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for NON ATEX weight indicator connected to MB4 Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
	TPRPC	Thermal printer for panel mounting for use with weight indicator, with connection cable, 110-240Vac / 5 VDC power adapter included.
	TPRP	Thermal printer for panel mounting for use with weight indicator, with connection cable, 5V power supply.
	DG6R	Expansion for a total of 6 outputs
	DFCLK	Clock and calendar for printing/displaying of the date and time.
	ALMEM	Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight. Clock/calendar integrated for print of the date/time.
	TECSUP	Technical assistance by telephone or at our premises for instrument configuration and printout formatting. NET HOURLY PRICE.

Accessories

	Code	Description
	ALSW	100-240 VAC 2,1 A 12 Vdc output, switching power adapter
	TECMAN	Printed technical manual (free, if downloaded from the web). NET PRICE.
	UMAN	Printed user manual (free, if dowloaded from the web and available in the CD, fitted with the product). NET PRICE.

Dini Argeo S.r.l.