|
Platforms Ex





ET SERIES 4-CELL PLATFORMS


  ET SERIES 4-CELL PLATFORMS
 


Mod./Dim. L P H A B F
ETA 1000 1000 90 850 850 60
ETM 1000 1250 90 850 1100 60
ETB 1250 1250 90 1070 1070 60
ETD 1250 1500 115 1070 1320 60
ETE 1500 1500 115 1320 1320 60
ETF 1500 2000 130 1300 1800 60
ETG-1 1500 2000 180 1300 1800 60
ETH 1500 2500 180 1280 2280 60
ETL 2000 2500 180 1780 2280 60
dimensions in mm

CONNECTOR PINOUT
ACCESSORIES
  • Indicator support column.
  • Frames for flush floor installation.
  • Access ramps.
  • Special sizes and capacities upon estimate.
Low profile electronic platforms with removable chequered loading plate. Fitted with IP68 STAINLESS STEEL load cells. Suitable for creating scales and electronic weighing systems for all types of industrial and commercial applications. Standard version is with approved load cell.

MAIN FEATURES

  • Fitted with 4 STAINLESS STEEL shear-beam approved load cells each with 1100 Ohm input resistance and made according to OIML R60 standards with protection against dust and under water immersion according to IP68 standards.
  • Steel tubular bearing structure, oven-fire painted in RAL 5007 blue; removable loading surface made in extra thick chequered galvanised steel; inspectionable trapdoor housing the junction box.
  • Adjustable, stainless steel shock-proof jointed feet and level. Up to 15 Vdc power supply.
  • Junction box and wiring cables with sheathing according to IP67 standards, and shielded 5m long 6-pin cable complete with female connector.

OPTIONS ONLY AVAILABLE AT TIME OF ORDER

  • Connection to the indicator and calibration with CE-M 3000e single range or 3000e+3000e dual range approval.
  • Stainless steel surface.
  • High resolution models for internal factory use.
  • AVAILABLE ON REQUEST: reinforced version for weighing of concentrated loads (coils, forklifts ecc.)

OPTIONS FOR ATEX VERSION

  • CCATEX: ATEX certificate for each load cell.
  • JB4QA: ATEX certified junction box.
  • DCATEXMECH: ATEX declaration for the PLATFORM (for the load cells ATEX declaration see CCATEX-1 code). Option to be offered only if the platform is ordered without the indicator, if so, refer to the chosen weight indicator available certifications.


    WARNING
    With ATEX weighing systems, when directly weighing light metals (such as aluminum, magnesium, titanium and their alloys), it is necessary to use the STAINLESS STEEL loading surface.

DOWNLOAD
Available versions
 
Code
l x w x h
(mm)
Nr. of cellsMax
(kg)
d
(g)

(g)*

2R (g)*
d HR
(g)*
ETA31000x1000x904x300kg30050100--20
ETA61000x1000x904x500kg600100200100-20050
ETA151000x1000x904x1000kg1500200500200-500100
ETM31000x1250x904x300kg30050100--20
ETM61000x1250x904x500kg600100200100-20050
ETM151000x1250x904x1000kg1500200500200-500100
ETB31250x1250x904x300kg30050100--20
ETB61250x1250x904x500kg600100200100-20050
ETB151250x1250x904x1000kg1500200500200-500100
ETB301250x1250x904x2000kg30005001000500-1000200
ETD61250x1500x1154x500kg600100200100-20050
ETD151250x1500x1154x1000kg1500200500200-500100
ETD301250x1500x1154x2000kg30005001000500-1000200
ETE61500x1500x1154x500kg600100200100-20050
ETE151500x1500x1154x1000kg1500200500200-500100
ETE301500x1500x1154x2000kg30005001000500-1000200
ETF61500x2000x1304x500kg600100200100-20050
ETF151500x2000x1304x1000kg1500200500200-500100
ETF301500x2000x1304x2000kg30005001000500-1000200
ETG60-11500x2000x1804x3000kg6000100020001000-2000500
ETH301500x2500x1804x3000kg30005001000--200
ETH601500x2500x1804x3000kg6000100020001000-2000500
ETH1001500x2500x1804x4500kg10000200050002000-50001000
ETL302000x2500x1804x3000kg30005001000--200
ETL602000x2500x1804x3000kg6000100020001000-2000500
ETL1002000x2500x1804x4500kg10000200050002000-50001000
WARNING: ETF, ETG, ETH, ETL models require special transport with quoted price.
(g)*: Divisions obtainable only with the relative options, in combination with Dini Argeo weight indicator.
Calibration service with weight indicator
 CodeDescription
DINICAL Connection to a Dini Argeo indicator and calibration. NET PRICE (*).
DINICAL-DRC Direct connection (without connectors) from platform to indicator and calibration service. € NET.
NOTE(1): delivered platform not connected: connection of the platform to the weight indicator to be carried out on site by qualified personnel.
Legal for trade approval , class III or IIII, with Dini Argeo indicator (only at time of order)
 CodeDescription
ECEM 3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEM2 Multi-range 3000+3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEMDOC Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €.
High resolution (d HR)(only at time of order)
 CodeDescription
ETHR High resolution model for internal factory use.
IP68 protection
 CodeDescription
ETIP68 IP68 connection fitted with specific cable, fairleads and connectors.
IP69K Protection
 CodeDescription
IP69KLC IP69K version for one loadcell.
Stainless steel loading surface
 CodeDescription
ETAPI Stainless steel loading surface 1000x1000x4 mm, for ETA platform.
ETMPI Stainless steel loading surface 1000x1250x4 mm, for ETM platforms.
ETBPI Stainless steel loading surface 1250x1250x4 mm, for ETB platform.
ETDPI Stainless steel loading surface 1250x1500x4 mm, for ETD platforms.
ETEPI Stainless steel loading surface 1500x1500x4 mm, for ETE platforms.
ETFPI Stainless steel loading surface 1500x2000x5 mm, for ETF platforms.
ETHPI Stainless steel loading surface 1500x2500x5 mm, for ETH platforms.
ETGPI Stainless steel loading surface 1500x2000x5 mm, for ETG platforms.
Floor columns
 CodeDescription
CSP38I-1 AISI 304 stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38 Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Frame for flush floor installation
 CodeDescription
ETATF Frame for flush floor installation for ETA platforms.
ETMTF Frame for flush floor installation for ETM platforms.
ETBTF Frame for flush floor installation for ETB platforms.
ETDTF Frame for flush floor installation for ETD platforms.
ETETF Frame for flush floor installation for ETE platforms.
ETFTF Frame for flush floor installation for ETF platforms.
ETGTF-1 Frame for flush floor installation for ETG platforms.
ETHTF Frame for flush floor installation for ETH platforms.
ETLTF Frame for flush floor installation for 2000x2500 mm platforms.
ETKB Ball joints kit in stainless steel for pit frame ETxTF and ETxTFI. This accessory can be used in substitution of the standard plates. It allows the platform to swing and to settle, improving the weighing performance. Compatible with platforms with load cells up to 2000 kg.
On/Off ramp
 CodeDescription
ETAR Painted steel ramp, 1000x900mm, for ETA and ETM platforms.
ETBR Painted steel ramp, 1250x900mm, for ETB platforms.
ETDR Painted steel ramp, 1250x1100mm, for ETD platforms.
ETER Painted steel ramp, 1500x1100mm, for ETE platforms.
ALWAYS MAKE SURE THAT THE RESULTING INCLINATION OF THE RAMP IS COMPATIBLE WITH THE SPECIFICATIONS OF THE VEHICLES USED FOR LOADING AND UNLOADING.
ALSO PROTECT THE PLATFORM SIDES BY MOUNTING, WHERE NECESSARY, APPROPRIATE ANGULAR PROTECTION PIECES (GUARD RAILS).
Plates for fixing on the floor
 CodeDescription
ETPFI-1 Kit of 4 plates for fixing on the floor, in stainless steel. For platforms ETG, ETH, ETL, ETA, ETM, ETB, ETD, ETE, ETF, LPI and FL series.
Options for ATEX version
 CodeDescription
EXCB6(S6) Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).
JB4QA ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
CCATEX-1 Optional ATEX version for single load cell. Marking: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga and ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
CCATEX3GD ATEX certificate for each load cell. Marking: ATEX II 3G Ex nA IIC T6 Gc for gas and ATEX II 3D Ex tc IIIC T115°C Dc IP65 for dusts. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR and IT).
DCATEXMECH ATEX version for the PLATFORM / LOAD CELL MOUNTING KIT for zone 1/21 (for the load cells ATEX declaration see CCATEX code). Option to be offered only if the platform is ordered without the indicator, otherwise refer to the available certifications for the chosen weight indicator. Provided with safety instructions and ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
Protection for junction box/electronic circuits
 CodeDescription
GELBOX(S1) Anti condensation, insulating, and sealing gel. Useful to protect the electronic circuits of the weighing system, even under prolonged immersions conditions. Pack of 300ml.
WARNING:
For JB4Q, JB4QA, JBxQI and JBxQAI: 300ml of gel required
Calibration service with Dini Argeo indicator (only at time of order)
 CodeDescription
CT5 ISO 17025 calibration certificate from 61 to 300 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT6 ISO 17025 calibration certificate from 301 to 1500 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT7 ISO 17025 calibration certificate from 1501 to 3000 kg for single scale/platform. For precision balances, industrial and crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CD3 ISO 9001 DINI ARGEO calibration report, from 1501 to 6000 kg, for single scale/platform. ACCREDIA reference weights.
CD4 ISO 9001 DINI ARGEO calibration report, from 6001 to 15000kg, for single scale/platform. ACCREDIA reference weights.

Pdf product page All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS