|
Pallet weighing





EPWLI “LOGISTIC” STAINLESS STEEL PALLET-WEIGHING SCALES SERIES


  EPWLI “LOGISTIC” STAINLESS STEEL PALLET-WEIGHING SCALES SERIES
 
SELECTABLE FUNCTION MODES
  • The user can select the operating modes directly using the dedicated key*:
    - High resolution display x 10
    - Precision weighing with temporary recalibration via a sample weight (for internal factory use)
    - Net/Gross
    - Newton to Kg converter
    - Lb to Kg converter
    - Free conversion factor (for meter and litre counters etc.)
    - Weight totalizer
    - Formulizer
    - +/- controller with quick target and threshold input
    - Percentage weighing
    - Percentage batching with programmable target
    - Piece counter
    - Hold
    - Two-speed filling/batching with reset upon starting (with optional DFIO)

    The “alibi memory” and “setpoint” functions are available in combination with the required operating mode and they are activated automatically when installing the relevant optional board.

  • Optional functions:
    - PEAK, detection of weight peaks (code DFWPK)
    - Newton to Kg converter (code DFWPK)

  • Access to the user menu is gained using the dedicated key* to adjust the weighing filter, date and time, setpoint and tare weight, which the user can access by entering a programmable access password.

    * These quick access keys to the menus can be blocked by configuring a dedicated password.
Quick and accurate stainless steel pallet weighing scales, easy to use and transport. Integrated extractable weight indicator complete of stretchable connection cable. The automatic multirange capacity allows the maximum accuracy on the lower weight values, mantaining the same load capacity. Available also in dual range APPROVED version, for legal for trade use.

MAIN FEATURES

  • New weighing software for an easier use of the instrument.
  • Weight indicator with support bracket having an adjustable inclination, for use on the column (optional), wall (optional adjustable support) or table.
  • Stainless steel IP68 case, easy to clean and resistant in harsh and corrosive environments.
  • 5-key functional waterproof keypad, with indication for quick access to main functions and regulations.
  • LCD 25mm backlit display with 6 high contrast digits and icons for indication of active functions.
  • Functions with 4 shear beam 1000 Ohm stainless steel load cells approved according to OIML R60 C3 standards (3000+3000 divisions), IP68 protection degree, able to handle double the nominal load.
  • Sheet-stainless steel structure and load surface, complete of adjustable feet.
  • Level, wheels, and transport handle.
  • Connection cable to the indicator, 3 m long.
  • Accuracy: +/-0,05% of the capacity.
  • Digital calibration and Set-Up from keypad or from PC through DINITOOLS.
  • Power supply 110-240Vac.

I/O SECTION:

  • RS232/C bidirectional port on RJ connector for quick connection (USB or RS485 optionally), configurable for PC, PLC, additional remote display.
  • RS232/C bidirectional port for connection to printer or labeller.
DOWNLOAD
Available versions
 
Code
l x w x h
(mm)
Max
(kg)
d
(kg)

2R (kg)
EPWLI-2 1260x800x75600/1500/20000,2/0,5/1--
EPWLIM-2  1260x800x751000/2000--0,5/1
Available firmwares
 CodeDescription
DFWPK Program for detecting weight peaks or kg to N conversion
Columns, supports brackets, visors
 CodeDescription
STFR-1 Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
CSP38I-1 Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38 Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Remote control
 CodeDescription
DFTL12-1(S1) 19-keys remote control and infrared receiver kit (max 8m).
TLR-1(S1) Radio frequency remote control and receiver. 433MHz, with 6 key, for use up to 50 m of distance, in appropriate environmental conditions (incompatible with repeater indicator or MSTSLV option).
Weight repeaters
 CodeDescription
DGT60R-1 Weight repeater with 60 mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure, and configurable protocol.
GLR100 RS485 alphanumeric repeater with 110 mm multicolour LED display
DGT100R-1 Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.
Communication Interfaces
 CodeDescription
RS485C(S1) Built-in RS485 interface (mounting and cable gland excluded).
ALMEM(S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time. With UL marked PCB, Terminal block, plastic box and labels (if expected).
DFIO(S1) Built-in 2 IN / 2 OUT interface (not combinable with ALMEM).
BLTH-2(S1) Built-in bluetooth interface. For wireless connection to the portable PC or PDA. Weighing app downloadable from Google Play.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
Storing the weighs
 CodeDescription
SWM WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales (price of a license for a single scale management).
Connection cables
 CodeDescription
RSCBUSB-1 USB PC/RS232 converter cable, l=1,5m. USB/RJ11 connector.
RSCBRJ(S1) RS232/C serial cable - DB9/RJ11 - l=1,5m.
RSCBRJ10M(S1) RS232/C serial cable - DB9/RJ11 - l=10m.
RSCBTW Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length
Date&Time option
 CodeDescription
DFCLK(S1) Real time clock for printing/displaying of the date and time. With UL marked PCB, Terminal block, plastic box and labels (if expected).
Calibration service (ACCREDIA/DAKKS) only at time of order
 CodeDescription
CT7 ISO 17025 calibration certificate from 1501 to 3000 kg. For precision and industrial scales, crane scales.
Other options
 CodeDescription
TECSUP Technical assistance by telephone. NET Hourly price.
TECMAN Printed technical manual. (Free, if downloaded from the web). € NET.
UMAN Printed user manual. (Free if downloaded from the web). € NET.
ECEMDOC Printed CE-M documentation. (Free if downloaded from the web). € NET.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS