TWL Series Overhead Monorail Weighing Scales
Standard Features
- It operates with 1 aluminum load cell with IP66 protection rating, approved according to OIML R60 C3
- AISI 304 stainless steel structure, fitted with accessories for fastening to the beam and threaded rods for fastening to the customer's track section
- Electropolished structure for easy cleaning: the smooth surface helps reduce dirt accumulation and the proliferation of microorganisms
- Maximum length of the overhead rail weighing section: 300 mm
- Up to 15 VDC power supply
- 6-wire shielded cable, 3m long, 5mm diameter
Options Available Only at Time of Order:
- Connection to the indicator and calibration with CE-M 3000e single range or 3000e+3000e dual range approval (with our indicator)
- Models with special sizes and capacities (ask for estimate)
- Possible adaptations with customer’s track section (to be supplied per account of manufacture), which will be quantified upon job card cost account
- Stainless steel load cell
Weighing modules for overhead monorails, easily adaptable with any type of handling system, even existing ones. Fitted with OIML approved load cell.
Available Versions
| Code | l x w x h (mm) | Nr. of cells | Max (kg) | d (g) | M (g*) | M 2R (g)* |
|---|---|---|---|---|---|---|
TWL15  |
310x200x125 | 1x300kg | 150 | 50 | 50 | 20-50 |
| TWL30 |
310x200x125 | 1x500kg | 300 | 100 | 100 | 50-100 |
(*) Divisions obtainable only with the relative options, in combination with Dini Argeo weight indicator.
NOTE:
- The track section to be applied to the scale and relative fastening to the threaded rods must be realized by the customer.
- ATTENTION: The order is possible only upon verification of the system's data, executed by our technicians when the filled out DataRequest_TWL_ENG module downloadable up here is sent.
- The capacity and division must be specified in the module for the verification of the feasibility, consequently to the requested features.
Parts
| Part # | Description |
|---|---|
| {#Available Versions} | |
| TWL15 | Overhead monorail weighing module with 150 kg capacity, 50 g division, electropolished stainless steel loading surface 310x200x125 mm, maximum length of the overhead rail weighing section: 300 mm. |
| TWL30 | Overhead monorail weighing module with 300 kg capacity, 100 g division, electropolished stainless steel loading surface 310x200x125 mm, maximum length of the overhead rail weighing section: 300 mm. |
Options
| Part # | Description |
|---|---|
| {#Calibration service with weight indicator} | |
| DINICAL | Connection to a Dini Argeo indicator and calibration. NET PRICE (*). |
| DINICAL-DRC | Direct connection (without connectors) from platform to indicator and calibration service. € NET.NOTE(1): delivered platform not connected: connection of the platform to the weight indicator to be carried out on site by qualified personnel. |
| {#Legal for trade approval, class III or IIII, with Dini Argeo weight indicator (only at time of order)} | |
| ECEM | 3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options. |
| ECEM2 | Multi-range 3000+3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options. |
| ECEMDOC | Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €. |
| {#Accessories} | |
| 100X50RTK | Kit for installing the TWG/TWL scale on a standard 100x50 rail. |
| {#Protection for junction box / electronic circuits} | |
| GELBOX | Anti condensation, insulating, and sealing gel. Useful to protect the electronic circuits of the weighing system, even under prolonged immersions conditions. Pack of 300ml. |
| {#Calibration service with Dini Argeo weight indicator (only at time of order)} | |
| CT5 | ISO 17025 calibration certificate from 61 to 300 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail. |
| CT6 | ISO 17025 calibration certificate from 301 to 1500 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail. |
| {#IP68 protection} | |
| TIP68 | IP68 connection fitted with specific cable, fairleads and connectors. |