EXBOX Box with Exd Protection for Weighing and Data Transmission in 2GD ATEX Zones

As of: Friday, May 9, 2025
Save or Print to PDF
Exbox 350

Standard Features

Box Features 

  • Aluminum alloy construction.
  • Tempered glass, transparent, frontal porthole for weight reading and electronics checking.
  • Painted with epoxy paint.
  • 6 cable glands at disposal and standard fitted with 4 ATEX cable glands, for power supply, grounding, load cell cable and analog output.
  • Weight: approx. 15kg.
  • IP65 protection degree.

Analog Output Features

  • Intrinsically safe Ex i barrier for 4-20mA analog output.
  • Atex marking:
    II (1) GD [Ex ia Ga] IIC
    [Ex ia Da] IIIC (-20°C <= Ta <= +60°C)
  • Ex i electronic parameters:
    Um=250V
    Uo= 25,2V
    Io= 93mA
    Po= 585mW
    Co= 0,107µF
    Lo= 4,30mH
    L/R= 62µH/ohm

Zener Barriers Features

  • The system includes 3 Zener barriers for load cells connection. The barriers can manage up to four 350Ohm load cells.
  • Atex marking for one barrier:
    II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC
  • Ex i electronic parameters:
    Barrier for signal and sense: Um=250VFuse: 50mA
    Uo: 17,4V
    Io: 25mA
    Po: 0,11W
    Co: 0,346µF
    Lo: 56,88mH
    Rmin: 705,6Ohm
    Barrier for supply: Um=250V
    Fuse: 100mA
    Uo: 24V
    Io: 164mA
    Po: 0,98W
    Co: 0,125µF
    Lo: 1,32mH
    Rmin: 147Ohm

Indicator Features

  • DGT1SAN weight indicator with analog output, specific for the reading, diagnostic and transmission of the weight of one or more load cells.
  • 5-key mechanic keyboard.
  • Red LED display with 6 8-mm digits and 6 LEDs for showing active functions.
  • Up to 10.000e or multi-range 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Up to 100.000 displayable divisions with internal resolution up to 3.000.000 points.
  • 1 channel A/D 24-bit sigma-delta conversion, up to 3200 conv./sec. auto-select.
  • Fitted with 2 inputs for managing the buttons provided as standard and 2 programmable electronic outputs, for the set points and levels management.

Box with Exd protection completed with weight indicator/transmitter, Zener barriers and intrinsically safe 4-20mA analog output. Fitted with 2 buttons for the main weighing operations with configurable functions, and two programmable electronic outputs for setpoints and levels management. Complete protection:
ATEX II 2 (1) GD Ex d [ia Ga] IIC T6 Gb / Ex tb [ia Da] IIIC T85°C Db IP66.

Parts

Part # Description
{#Available versions}
EXBOXAN Aluminum alloy GUBW3 box for ATEX 2GD zones. Protection degree: ATEX II 2 (1) GD. Fitted with 2 buttons, 4 ATEX cable glands, DGT1SAN indicator with analog output, LED display, and 5-key keyboard.

Options

Part # Description
{#Declaration of ATEX conformity}
DCATEXBOX Declaration of ATEX conformity of whole. Ex II 2G IIC T6 Gb X and Ex II 2D IIIC T125°C Db X system, with relative label of whole system, for Dini Argeo ATEX box with weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). Provided with descriptive document of the assembly and ATEX EU declaration of conformity of the assembly (EN and IT).
{#Connection cables}
EXCB6 Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).
EXACBPW 4x1 mm² armored cable (suitable for Ex zones). PVC compound inner sheath. Armor: galvanized steel wire braid. Outer sheath made of PVC compound, diameter 8.8 mm. Operating temperature: -30 / +80 °C. Minimum bending radius >/= 10 x O.D. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).
EXACB4 4x0.5 mm² armoured cable (suitable for Ex zones). PVC inner sheath. Armour: galvanised steel wire braid. Outer sheath PVC, diameter 7.3 mm. Temperature range: -30 / +80 °C. Minimum bending radius >/= 10 x O.D. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).
GNDCAB6 Shielded 6mm² cable for grounding, for ATEX zones. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).

Dini Argeo S.r.l. | Via della Fisica, 20 - 41042, Spezzano di Fiorano, Modena (MO), Italy | Tel.: +39 0536 843418

www.diniargeo.com