ETI Series 4-Cell Stainless Steel Platforms

As of: Friday, May 9, 2025

Standard Features

Fitted with 4 stainless steel shear-beam OIML approved load cells each with 1000 Ohm input resistance with protection against dust and immersion according to IP68 standards
Stainless steel bearing tubular structure, with removable stainless steel plate (except for the ELCI models which have a non removable plate) and IP67 junction box housing
Adjustable, stainless steel shock-proof jointed feet and level
Up to 15 VDC power supply
Hermetic junction box and wiring cables with sheathing according to IP67 standards, and shielded 5m long 6-pin cable with connectors for connection to the indicator

Low profile stainless steel electronic platforms with removable loading plate. Fitted with IP68 stainless steel load cells. Suitable for creating scales and electronic weighing systems for all types of industrial and commercial applications. Standard version is with approved load cell.

Specifications

Accessories:

Indicator support stand
Frames for flush floor installation
Access ramps
Models with special sizes and capacities

Options Only Available at Time of Order:

Calibration with CE-M single or double range approval
High resolution models for internal factory use
AVAILABLE ON REQUEST: reinforced version for weighing of concentrated loads (coils, forklifts etc.)
Structure in AISI316 stainless steel

ATEX technical features:

Each ATEX platform includes the following certified products:

Load cell:
II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) From IP65
Mechanical structure:
II 2G Ex h IIC T6 Gb (-20°C ≤ Tamb ≤ +60°C) X
II 2D Ex h IIIC T85°C Db (-20°C ≤ Tamb ≤ +60°C) X
Junction box:
II 2G Ex ib IIC T6 Gb per gas
II 2D Ex tb IIIC T115°C Db IP65

For ETF / ETG / ETH / ETL models, the ATEX version is available only upon request.

Available Versions

Code	l x w x h (mm)	Nr. of cells	Max (kg)	d (g)	(g)*	2R (g)*	d HR (g)*
ELCI3	800x800x90	4x300kg	300	50	100	--	20
ELCI6	800x800x90	4x500kg	600	100	200	100-2	50
ELCI15	800x800x90	4x1000kg	1500	200	500	200-500	1
ETAI3	1000x1000x90	4x300kg	300	50	10		20
ETAI6	1000x1000x90	4x500kg	600	100	200	100-200	50
ETAI15	1000x1000x90	4x1000kg	1500	200	500	200-500	100
ETMI3	1000x1250x90	4x300kg	300	50	100	--	20
ETMI6	1000x1250x90	4x500kg	600	100	200	100-200	50
ETMI15	1000x1250x90	4x1000kg	1500	200	500	200-500	100
ETBI3	1250x1250x90	4x300kg	300	50	100	--	20
ETBI6	1250x1250x90	4x500kg	600	100	200	100-200	50
ETBI15	1250x1250x90	4x1000kg	1500	200	500	200-500	100
ETBI30	1250x1250x90	4x2000kg	3000	500	1000	500-1000	200
ETDI6	1250x1500x115	4x500kg	600	100	200	100-200	50
ETDI15	1250x1500x115	4x1000kg	1500	200	500	200-500	100
ETDI30	1250x1500x115	4x2000kg	3000	500	1000	500-1000	200
ETEI6	1500x1500x115	4x500kg	600	100	200	100-200	50
ETEI15	1500x1500x115	4x1000kg	1500	200	500	200-500	100
ETEI30	1500x1500x115	4x2000kg	3000	500	1000	500-1000	200
ETFI6	1500x2000x130	4x500kg	600	100	200	100-200	50
ETFI15	1500x2000x130	4x1000kg	1500	200	500	200-500	100
ETFI30	1500x2000x130	4x2000kg	3000	500	1000	500-1000	200
ETGI60-1	1500x2000x180	4x3000kg	6000	1000	2000	1000-2000	500
ETHI30	1500x2500x180	4x3000kg	3000	500	1000	--	200
ETHI60	1500x2500x180	4x3000kg	6000	1000	2000	1000-2000	500
ETLI30	2000x2500x180	4x3000kg	3000	500	1000	--	200
ETLI60	2000x2500x180	4x3000kg	6000	1000	2000	1000-2000	500
ETLI100	2000x2500x180	4x4500kg	10000	2000	5000	2000-5000	1000

WARNING: ETFI, ETGI, ETHI, ETLI models require special transportation with quoted price.
(g)* : Divisions obtainable only with the relative options, in combination with Dini Argeo weight indicator.

Connector Pinout

Connector Pinout ES ESI ET ETI

Parts

Part #	Description
{#Available versions}
ELCI3	4-cell platform with 300 kg capacity, 50 g division, stainless steel loading surface 800x800 mm, h= 90 mm, stainless steel structure. 5 m shielded cable.
ELCI6	4 load cell stainless steel platform, Max=600kg, d=100g, surface 800x800mm. 5 m shielded cable.
ELCI15	4-cell platform with 1500 kg capacity, 200 g division, stainless steel loading surface 800x800 mm, h= 90 mm, stainless steel structure. 5 m shielded cable.
ETAI3	4 C3 cell platform, Max=300kg, d=50g, loading surface 1000x1000mm. Stainless steel structure and loading plate. Shielded cable 5 m.
ETAI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1000x1000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETAI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1000x1000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETMI3	4 C3 cell platform, Max=300kg, d=50g, loading surface 1000x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETMI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1000x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETMI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1000x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETBI3	4 C3 cell platform, Max=300kg, d=50g, loading surface 1250x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETBI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1250x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETBI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1250x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETBI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 1250x1250mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETDI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1250x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETDI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1250x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETDI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 1250x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETEI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1500x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETEI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1500x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETEI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 1500x1500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETFI6	4 C3 cell platform, Max=600kg, d=100g, loading surface 1500x2000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETFI15	4 C3 cell platform, Max=1500kg, d=200g, loading surface 1500x2000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETFI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 1500x2000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETGI60-2	4 C3 cell platform, Max=6000kg, d=1000g, loading surface 1500x2000mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETHI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 1500x2500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETHI60	4 C3 cell platform, Max=6000kg, d=1000g, loading surface 1500x2500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETLI30	4 C3 cell platform, Max=3000kg, d=500g, loading surface 2000x2500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETLI60	4 C3 cell platform, Max=6000kg, d=100g, loading surface 2000x2500mm. Stainless steel structure and loading plate. 5 m shielded cable.
ETLI100	4 C3 cell platform, Max=10000kg, d=200g, loading surface 2000x2500mm. Stainless steel structure and loading plate. 5 m shielded cable.

Options

Part #	Description
{#IP69K Protection}
IP69KLC	IP69K version for one loadcell.
{#IP68 protection}
ETIP68	IP68 connection fitted with specific cable, fairleads and connectors.
{#Calibration service with weight indicator}
DINICAL	Connection to a Dini Argeo indicator and calibration. NET PRICE (*).
DINICAL-DRC	Direct connection (without connectors) from platform to indicator and calibration service. € NET.NOTE(1): delivered platform not connected: connection of the platform to the weight indicator to be carried out on site by qualified personnel.
{#Legal for trade approval, class III or IIII, with Dini Argeo weight indicator (only at time of order)}
ECEM	3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEM2	Multi-range 3000+3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEMDOC	Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €.
{#High resolution (d HR) (only at time of order)}
ETHR	High resolution model for internal factory use.
{#Floor columns}
CSP38I-1	AISI 304 stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38	Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D	Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
{#Frame for flush floor installation}
ETATFI	Stainless steel frame for flush floor installation for ETAI platforms.
ETMTFI	Stainless steel frame for flush floor installation for ETMI platforms.
ETBTFI	Stainless steel frame for flush floor installation for ETBI platforms.
ETDTFI	Stainless steel frame for flush floor installation for ETDI platforms.
ETETFI	Stainless steel frame for flush floor installation for ETEI platforms.
ETFTFI	Stainless steel frame for flush floor installation for ETFI platforms.
ETHTFI	Stainless steel frame for flush floor installation for ETHI platforms.
ETLTFI	Stainless steel frame for flush floor installation for ETLI platforms.
ETKB	Ball joints kit in stainless steel for pit frame ETxTF and ETxTFI. This accessory can be used in substitution of the standard plates. It allows the platform to swing and to settle, improving the weighing performance. Compatible with platforms with load cells up to 2000 kg.
{#On / Off ramp}
ETARI	Stainless steel ramp, 1000x900mm, for ETAI and ETMI platforms.
ETBRI	Stainless steel ramp, 1250x900mm, for ETBI platforms.
ETDRI	Stainless steel ramp, 1250x1100mm, for ETDI platforms.
ETERI	Stainless steel ramp, 1500x1100mm, for ETEI platforms.
{#Options for ATEX version}
EXCB6	Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m. Maximum orderable length: 100 m (longer lengths available only upon request).
CCATEX-1	Optional ATEX version for single load cell. Marking: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga and ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
CCATEX3GD	ATEX certificate for each load cell. Marking: ATEX II 3G Ex nA IIC T6 Gc for gas and ATEX II 3D Ex tc IIIC T115°C Dc IP65 for dusts. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR and IT).
JB4QA	ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
JB4QAI	ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
DCATEXMECH	ATEX version for the PLATFORM / LOAD CELL MOUNTING KIT for zone 1/21 (for the load cells ATEX declaration see CCATEX code). Option to be offered only if the platform is ordered without the indicator, otherwise refer to the available certifications for the chosen weight indicator. Provided with safety instructions and ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
{#Plates for fixing on the floor}
ETPFI-1	Kit of 4 plates for fixing on the floor, in stainless steel. For platforms ETG, ETH, ETL, ETA, ETM, ETB, ETD, ETE, ETF, LPI and FL series.
{#Protection for junction box / electronic circuits}
GELBOX	Anti condensation, insulating, and sealing gel. Useful to protect the electronic circuits of the weighing system, even under prolonged immersions conditions. Pack of 300ml.
{#Calibration service with Dini Argeo weight indicator (only at time of order)}
CT5	ISO 17025 calibration certificate from 61 to 300 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT6	ISO 17025 calibration certificate from 301 to 1500 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT7	ISO 17025 calibration certificate from 1501 to 3000 kg for single scale/platform. For precision balances, industrial and crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CD3	ISO 9001 DINI ARGEO calibration report, from 1501 to 6000 kg, for single scale/platform. ACCREDIA reference weights.
CD4	ISO 9001 DINI ARGEO calibration report, from 6001 to 15000kg, for single scale/platform. ACCREDIA reference weights.