|
Dynamic axle weighing





RWSCP: PLATFORM FOR DYNAMIC WEIGHING OF THE VEHICLE AXLES


  RWSCP: PLATFORM FOR DYNAMIC WEIGHING OF THE VEHICLE AXLES
 


RWSCP: reinforced platform for dynamic axle weighing.



RWSCP: installation example, with a well leveled concrete surface.


3590EPXP: indicator for dynamic axle weighing, with printer (to be combined to the optional AF09 software)

Reinforced platform which allows you to calculate the weight of a vehicle in transit, summing the various axles, weighed dynamically. Designed for a flush floor installation.

TECHNICAL FEATURES

  • Sturdy loading surface in striated sheet steel, sized to withstand any load on the basis of the parameters dictated by the 96/53/EEC directive (maximum load on single axle for the vehicles transiting in Europe).
  • Frame for the containment of RWSCP platform, made up of a single bearing structure, in welded painted steel, that does not require assembly. It facilitates the installation of the scale and simplifies the masonry.
  • Sandblasting and varnishing with bi-component epoxy coating, highly resistant to corrosion.
  • Dimensions of the load surface (lxw): 3 x 0,73 m.
  • 6 compression load cells, C3 class, stainless steel IP68.
  • 20m cable for the connection to the weight indicator.
  • Dust and waterproof wirings and connections, easy to connect and disconnect.
  • Hermetic junction box.
  • Central inspected trapdoors for the ordinary maintenance.
  • Wide range of connectable weight indicators, also functioning with rechargeable battery, which allow to use the platform also without an electrical power supply.
  • Maximum speed of transit: 5km/h.
  • Accuracy 1% for internal use, 2% for legal for trade use (* OIML R134 CERTIFICATION).
    This kind of accuracy is obtainable by following the instructions in the installation manual.

(*) OIML R134 CERTIFICATION

  • The RWSCP20T platform combined with a 3590E "AF09" indicator is OIML R134 certified for the dynamic vehicle weighing, according to the legal standards in force in the Country of use

3590E "AF09" SERIES WEIGHT INDICATOR

  • The 3590E weight indicator, in "AF09" version, is suitable for creating dynamic vehicle weighing systems.
    The indicator has two available functioning modes:
    - Checking the weight of the vehicle with printing of the axle and the total weighs.
    - Axle totalisation with input/output function, with storage of the input weighs through ID CODE or VEHICLE PLATE.
    2 digital, programmable inputs and 4 output are available as standard fitted, to create automations, or pilot bars, control light, etc.
DOWNLOAD
Available versions
 
Code
l x w x h
(mm)
Nr. of cellsMax
(kg)
d
(kg)
RWSCP20T3000x7306 x 5000kg200005
RWSCP40T3000x7306 x 10000kg4000010
RWSCP50T3000x7306 x 12500kg5000020
Application scheme for flush floor installation
Example of a weighing station with 3590EBOX

Click here for the installation details
Calibration service with weight indicator
 CodeDescription
DINICAL Connection to a Dini Argeo indicator and calibration. NET PRICE.
Bars for facilitated installation
 CodeDescription
RWSAI Kit made up of 2 level bars for RWS installation.
Protection for junction box/electronic circuits
 CodeDescription
GELBOX(S1) Anti condensation, insulating, and sealing gel. Useful for the protection of the electronic circuits of the weighing system, even in conditions of prolonged immersions in time. Pack of 300ml.
WARNING:
For JB10Q/JB10QD: 1200ml of gel required
3590E weight indicator in "AF09" version, OIML R134 certified
 CodeDescription
3590EBOXRFID Self-service system with 3590E indicator and RFID reader. Stainless steel box, thermal printer and AF03 software for weighbridge management.
3590ETPBOXRFID Self-service kiosk with RFID reader. AF03GT software for weighbridge management.
3590EGT8 8-inch Touch Screen indicator with stainless steel IP68 case. Tilting version with stainless steel support for bench/wall installation. Internal Ethernet port as standard. Fitted with AF01 software as standard.
3590EGT Colour Touch Screen indicator with AF01 software. Stainless steel IP68 case.
3590ET Touch screen indicator with AF01 software. ABS enclosure. Colour Display.
3590EXT Indicator with AF01 software. Stainless steel IP68 case, 25-key keypad, LED display and backlit graphic LCD display.
3590EPXP Indicator with AF01 software and attached printer. ABS case, 25-key keypad, LED display and backlit graphic LCD display.
3590EXP Indicator with AF01 software. ABS IP65 case, 25-key keypad, LED display and backlit graphic LCD display.
AF09 Software for dynamic and static axle weighing with 1 or 2 platforms.
Communication Interfaces
 CodeDescription
SETHDIN-1 RS232 / RS485 / Ethernet converter. Modbus RTU / Modbus TCP/IP (if applicable). Connectable to all Dini Argeo weight indicators via the serial port. ABS housing for DIN rail. With PCB, screw terminals, plastic box and UL marked labels (if applicable).
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
OBRF-2(S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRFUSB-3 External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
RS485C(S1) Built-in RS485 interface (mounting and cable gland excluded).
RS485OPTO(S1) Built-in optoisolated RS485 interface (mounting, cable gland excluded).
C2IN(S1) Set of 2 optoisolated input (mounting and cable gland excluded).
C4OUT(S1) Set of 4 optoisolated output (mounting and cable gland excluded).
Storing the weighs (only at time of order)
 CodeDescription
USBC(S1) Built-in USB port kit for data storing on USB key. Fitted with USB key for PC.
USBEGT Built-in USB port to store data on a USB driver. To be combined with touchscreen weight indicators. It does not occupy serial ports. Fitted with USB key for PC. TAKE NOTE: this interface cannot be ordered separately and is to be combined with a weight indicator as part of the order.
USBK Set of 5 USB keys for recording the weighs.
SWM WeiMonitor PC program to monitor and record in real time weighings performed on the connected scale(the price is intended for the license to manage one scale).
Calibration service with Dini Argeo indicator (only at time of order)
 CodeDescription
CD5 ISO 9001 DINI ARGEO calibration report, from 20001 a 60000kg. For bench and floor scales, and platforms. ACCREDIA reference weights.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS