|
DFW Series





DFWT "TRUCK": INDICATOR FOR WEIGHBRIDGES, WITH INPUT/OUTPUT FUNCTION


  DFWT "TRUCK": INDICATOR FOR WEIGHBRIDGES, WITH INPUT/OUTPUT FUNCTION
 
I/O SECTION
  • Bidirectional serial port configurable as RS232/C for connection to the attached thermal printer.
  • Bidirectional serial port configurable as RS232/C on RJ connector (or RS485 optional) for connection to the PC/PLC.
  • Ethernet or WiFi interfaces (optional).
AVAILABLE FUNCTIONS FROM REMOTE CONTROL
  • Infrared 19-key remote control: zero, tare / manual tare, enable / disable function, print, switch-off.
  • Radiofrequency 6-key remote control: zero, tare, enable / disable function, print, switch-off.
Digital weight indicator for weighbridge management. Extremely simple and intuitive, easing the user with the weighing operations. Fitted with database of 99 open input weighs and database of 30 quickly recallable tares. Fitted with attached thermal printer. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • Waterproof 17-key functional keyboard.
  • Very bright red LED display with 6 digits 25 mm high; easily visible from all angles and from long distances, with adjustable brightness intensity.
    Complete of 6 Leds for showing the active functions.
  • Waterproof ABS IP65 case, easy to clean and resistant to harsh and corrosive environments.
  • Fitted with attached thermal printer: speed > 50mm/sec, 203 dpi resolution, 24/40 columns, 58 mm paper width, 50 mm roll diameter.
  • Dimensions: 408x186x125mm.
  • Suitable for use on the table, column, or wall.
  • A/D 24 bit, 4 channel converter, up to 200 conv./sec. autoselect, and up to 8 signal linearisation points.
  • Up to 10.000e or multi-range 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Up to 1.000.000 divisions displayable with built-in resolution up to 3.000.000 points.
  • Real time clock.
  • Calibration and digital Set-Up from the keyboard or from PC with DINITOOLS.
  • Built-in rechargeable battery and internal 110-240 Vac adapter.
  • Connection with up to 16 load cells having an input resistance of 700 Ohm.

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76

FUNCTIONS

  • Zeroing.
  • Semi automatic tare or with manual introduction, locked or unlocked.
  • Database of up to 30 quickly recallable tares.
  • Weigh storage in input through ID CODE (up to 99 suspended weighs)
  • Calculation of the loaded/unloaded net weight through difference between input and output.
  • Single input/output weigh, with entry of the tare value or tare selection from database.
  • Printing of the input and output total weight, and the total difference.
  • Printing of the list of open weighs, ID, and date and time.
  • Printing of the single customisable weigh ticket, with company name, weigh progressives, date and time, etc.
DOWNLOAD
Available versions
 CodeDescription
DFWRPT Indicator for weighbridges management with attached printer. IP65 ABS case, 17-key keypad, backlit LCD display and real time clock.
Optional power supply cords
 CodeDescription
PWCORDUK Power supply cord with BS1363 plug (UK plug).
PWCORDCH Power supply cord with SEV1011 plug (CH plug).
Legal for trade approval
 CodeDescription
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.
Junction Box / Boards - Load Cell cables
 CodeDescription
DFW4CH(S1) Internal board for a quick connection of up to 4 (equalised) scales.
LCCBC(S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered.
LCCB5C(S1) LCCBC cable + 5m extension cable.
LCCB10C(S1) LCCBC cable + 10m extension cable.
Storing the weighs (only at time of order)
 CodeDescription
USBC(S1) Built-in USB port kit for data storing on USB key. Fitted with USB key for PC.
USBK Set of 5 USB keys for recording the weighs.
SWM WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales (price of a license for a single scale management).
Printers/Labellers
 CodeDescription
CNFSERV Custom-made printouts for DFW and DFWL series. NET price.
Communication Interfaces
 CodeDescription
RSCBUSBPG(S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65 and IP68 protection system.
RSCBUSB485 USB cable converter PC/RS485, l=1,5m. With metallic PG9 cable gland. To be combined with an indicator fitted with optional or standard RS485 output.
OBRF-2(S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRFUSB-3 External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRF232-2 External 868 MHz radio module with ABS box and cable l=3m. Fitted with DB9 connector and external power adapter. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module).
WIFITD-1(S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
DF485(S1) RS485 bidirectional port for DFW series.
BLTH-2(S1) Built-in bluetooth interface. For wireless connection to the portable PC or PDA. Weighing app downloadable from Google Play.
Digital Input/Output
 CodeDescription
DAC16O(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.
DFIO(S1) Built-in 2 IN / 2 OUT interface (not combinable with ALMEM).
Connection cables
 CodeDescription
RSCBUSBPG(S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65 and IP68 protection system.
RSCBRJ(S1) RS232/C serial cable - DB9/RJ11 - l=1,5m.
RSCBRJ10M(S1) RS232/C serial cable - DB9/RJ11 - l=10m.
ETHCBRJ(S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.
Weight repeaters
 CodeDescription
DGT100R Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.
Columns, supports brackets, visors
 CodeDescription
STFI-1 Stainless steel fixing bracket. For mounting the weight indicator on wall.
STFR-1 Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
KWR10 Kit of 4 rubber wheels and galvanized steel frame for CSP column. A pair of idler wheels and a pair with brakes.
CSP38I-1 Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38 Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Options for ATEX version
 CodeDescription
ZBA1S Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a hazardous-proof case. Marking: ATEX II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC.
KZBA ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in an explosive zone. Dimensions 180x180x150mm.Can connect up to 4 Load Cell of 350 Ohm. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +50°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +50°C) for dust.
KMB4 Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.
DCATEXMB4 ATEX declaration of the whole for systems with zener barriers. Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option).
JB4QA ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
JB4QAI Stainless steel IP66, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
EXCB6(S6) Shielded, blue, 6x0,22mm² cable, for EX i (2GD) applications. €/m
Keyboard protection cover
 CodeDescription
CVRXP Kit of 10 moulded protective covers in transparent plastic. For indicator DFWXP or 3590EXP with ABS case.
Remote control
 CodeDescription
DFTL12-1(S1) 19-keys remote control and infrared receiver kit (max 8m).
TLR-1(S1) Radio frequency remote control and receiver. 433MHz, with 6 key, for use up to 50 m of distance, in appropriate environmental conditions.
PG cable glands
 CodeDescription
PG7P 10 PG7 ABS cable gland set for weight indicators.
PG9P 10 PG9 ABS cable gland set for weight indicators.
Other options
 CodeDescription
TECSUP Technical assistance by telephone. NET Hourly price.
TECMAN Printed technical manual. (Free, if downloaded from the web). € NET.
UMAN Printed user manual. (Free if downloaded from the web). € NET.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS