|
DFW Series





DFWT "TRUCK": INDICATOR FOR WEIGHBRIDGES, WITH INPUT/OUTPUT FUNCTION


  DFWT "TRUCK": INDICATOR FOR WEIGHBRIDGES, WITH INPUT/OUTPUT FUNCTION
 

DFWT weight indicator, version with RED LED display

I/O SECTION
  • Bidirectional serial port configurable as RS232/C for connection to the attached thermal printer.
  • Bidirectional serial port configurable as RS232/C on RJ connector (or RS485 optional) for connection to the PC/PLC.
  • Ethernet or WiFi interfaces (optional).
AVAILABLE FUNCTIONS FROM REMOTE CONTROL
  • Infrared 19-key remote control: zero, tare / manual tare, enable / disable function, print, switch-off.
  • Radiofrequency 6-key remote control: zero, tare, enable / disable function, print, switch-off.
Digital weight indicator for weighbridge management. Extremely simple and intuitive, easing the user with the weighing operations. Fitted with database of 99 open input weighs and database of 20 quickly recallable tares. Fitted with attached thermal printer. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • Waterproof 17-key functional keyboard.
  • Very bright red LED display with 6 digits 25 mm high; easily visible from all angles and from long distances, with adjustable brightness intensity.
    Complete of 6 Leds for showing the active functions.
  • ABS case, easy to clean and resistant to harsh and corrosive environments.
  • Fitted with attached thermal printer: speed > 50mm/sec, 203 dpi resolution, 24/40 columns, 58 mm paper width, 50 mm roll diameter.
  • Dimensions: 408x186x125mm.
  • Suitable for use on the table, column, or wall.
  • A/D 24 bit, 4 channel converter, up to 200 conv./sec. autoselect, and up to 8 signal linearisation points.
  • Up to 10.000e or multi-range 3 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
  • Up to 1.000.000 divisions displayable with built-in resolution up to 3.000.000 points.
  • Real time clock.
  • Calibration and digital Set-Up from the keyboard or from PC with DINITOOLS.
  • Built-in rechargeable battery and internal 110-240 Vac adapter.
  • Connection with up to 16 load cells having an input resistance of 700 Ohm.

MAIN CERTIFICATIONS

  • EU Type Examination Certificate (45501:2015)
  • OIML R76

FUNCTIONS

  • Zeroing.
  • Semi automatic tare or with manual introduction, locked or unlocked.
  • Database of up to 20 quickly recallable tares.
  • Weigh storage in input through ID CODE (up to 99 suspended weighs)
  • Calculation of the loaded/unloaded net weight through difference between input and output.
  • Single input/output weigh, with entry of the tare value or tare selection from database.
  • Printing of the input and output total weight, and the total difference.
  • Printing of the list of open weighs, ID, and date and time.
  • Printing of the single customisable weigh ticket, with company name, weigh progressives, date and time, etc.
DOWNLOAD
Available versions
 CodeDescription
DFWRPT Indicator for weighbridges management with attached printer. IP65 ABS case, 17-key keypad, backlit LCD display and real time clock.
Optional power supply cords
 CodeDescription
PWCORDUK Version with BS1363 power cord (UK plug).
PWCORDCH Power supply cord with SEV1011 plug (CH plug).
PWCORDUS Version with US type B power cord (Japan, North and Central America).
PWCORDAUS Version with AU power cord.
Approval for sale to third parties
 CodeDescription
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination with a Dini Argeo indicator.
Junction Box / Boards - Load Cell cables
 CodeDescription
DFW4CH(S1) Internal board for a quick connection of more (equalised) channels.
LCCBC(S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered.
LCCB5C(S1) LCCBC cable + 5m extension cable.
LCCB10C(S1) LCCBC cable + 10m extension cable.
Storing the weighs
 CodeDescription
USBC-1(S1) Built-in USB port kit for data storing on USB key. Fitted with USB key for PC.
USBK Set of 5 USB keys for recording the weighs.
SWM "WeiMonitor" PC program to monitor and record in real time weighs performed on the connected scale (the price is intended for the license to manage one scale).
Printers/Labellers
 CodeDescription
CNFSERV Custom-made printouts for DFW and DFWL series. NET price.
CODEPG Service for loading a customised code-page on TPR printer (standard is PC437 - Central Europe, USA)
Communication Interfaces
 CodeDescription
RSCBUSBPG(S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65, IP68 and IP69K protection system.
RSCBUSB485 USB cable converter PC/RS485, l=1,5m. With metallic PG9 cable gland. To be combined with an indicator fitted with optional or standard RS485 output.
OBRF2G4(S1) External 2.4 GHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 45 m indoors, 140m outdoors. 39 configurable channels.
OBRF2G4-USB External 2.4 GHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 45 m indoors, 140 outdoors. 39 configurable channels.
WIFITD-3(S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
DF485(S1) RS485 bidirectional port for DFW series.
BLTH-3(S1) Built-in bluetooth interface. For wireless connection of the scale to tablets, smartphones, laptops or barcode scanners.
Attention: this interface is not suitable for Master-Slave systems.
Connection cables
 CodeDescription
RSCBUSBPG(S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65, IP68 and IP69K protection system.
RSCBRJ(S1) RS232/C serial cable - DB9/RJ11 - l=1,5m.
RSCBRJ10M(S1) RS232/C serial cable - DB9/RJ11 - l=10m.
ETHCBRJ(S1) Ethernet cable, l=1,5m. Fitted with fairlead, for connection between indicator and PC network.
Weight repeaters
 CodeDescription
DGT100R-1 Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.
Columns, supports brackets, visors
 CodeDescription
STFI-1 AISI 304 stainless steel fixing bracket. For weight indicator wall mounting.
STFR-1 AISI 304 stainless steel fixing bracket with adjustable inclination. For weight indicator wall mounting.
CSP38I-1 AISI 304 stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38 Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Options for ATEX version
 CodeDescription
ZBA1S Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a flame-proof case. Marking: ATEX/IECEx II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
KZBA-1 ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in a dangerous zone. Dimensions 179x359x166,5mm. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc X for gas, ATEX II 3(1)D Ex tc [ia Da] IIIC T135°C Dc IP66 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
KMB4-1 Kit of 3 ATEX Zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in a dangerous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
DCATEXMB4 ATEX declaration for the whole system with Dini Argeo Zener barriers. Ex II 2G IIC T6 Gb X e Ex II 2D IIIC T125°C Db X system, with label of the whole system, for weight indicator connected to Dini Argeo zener barriers, connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). Provided with descriptive document of the assembly and ATEX EU declaration of conformity of the assembly (EN and IT).
JB4QA ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
JB4QAI ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
EXCB6(S6) Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m
Keyboard protection cover
 CodeDescription
CVRXP Kit of 10 moulded protective covers in transparent plastic. For indicator DFWXP or 3590EXP with ABS case.
Remote control
 CodeDescription
DFTL12-1(S1) 19-keys remote control and infrared receiver kit (max 8m).
TLRP(S1) Radio frequency remote control and receiver with extension, for installations where other option boards with connection to AMP are required.
DFWT Indicator for weighbridges management with attached thermal printer IP65 ABS case, 17-key keypad, backlit LCD display and real time clock.
PG cable glands
 CodeDescription
PG7P 10 PG7 ABS cable gland set for weight indicators.
PG9P 10 PG9 ABS cable gland set for weight indicators.
PG9PG11C Kit of 10 metalic IP68 from PG9 to PG11 adapters (ø max cable 12mm)
PG9PG13C Kit of 10 metalic IP68 from PG9 to PG13 adapters (ø max cable 12mm)
Other options
 CodeDescription
TECSUP Technical assistance by telephone upon request.
TECMAN Printed technical manual (Free download from the website).
UMAN Printed user manual (Free download from the website).
ECEMDOC Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €.

Pdf product page All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS