|
4 cell platforms





ETI SERIES 4-CELLS STAINLESS STEEL PLATFORMS


  ETI SERIES 4-CELLS STAINLESS STEEL PLATFORMS
 
CONNECTOR PINOUT
OPTIONS FOR ATEX VERSION
  • CCATEX: ATEX certificate for each load cell.
  • JB4QA: ATEX certified junction box.
  • DCATEXMECH: ATEX declaration for the PLATFORM (for the load cells ATEX declaration see CCATEX-1 code). Option to be offered only if the platform is ordered without the indicator, if so, refer to the chosen weight indicator available certifications.
Low profile STAINLESS STEEL electronic platforms with removable loading plate. Fitted with IP68 STAINLESS STEEL load cells. Suitable for creating scales and electronic weighing systems for all types of industrial and commercial applications. Standard version is with approved load cell.

MAIN FEATURES

  • Fitted with 4 STAINLESS STEEL shear-beam OIML approved load cells each with 1000 Ohm input resistance with protection against dust and immersion according to IP68 standards.
  • Stainless steel bearing tubular structure, with removable stainless steel plate (except for the ELCI models which have a non removable plate) and IP67 junction box housing.
  • Adjustable, stainless steel shock-proof jointed feet and level.
  • Up to 15 Vdc power supply.
  • Hermetic junction box and wiring cables with sheathing according to IP67 standards, and shielded 5m long 6-pin cable complete with female connector.

OPTIONS ONLY AVAILABLE AT TIME OF ORDER

  • Calibration with CE-M single or double range approval.
  • High resolution models for internal factory use.
  • AVAILABLE ON REQUEST: reinforced version for weighing of concentrated loads (coils, forklifts ecc.)
    Structure in AISI316 stainless steel.

ACCESSORIES

  • Indicator support stand.
  • Frames for flush floor installation.
  • Access ramps.
  • Models with special sizes and capacities.
DOWNLOAD
Available versions
 
Code
l x w x h
(mm)
Nr. of cellsMax
(kg)
d
(g)

(g)*

2R (g)*
d HR
(g)*
ELCI3800x800x904x300kg30050100--20
ELCI6800x800x904x500kg600100200100-20050
ELCI15800x800x904x1000kg1500200500200-500100
ETAI31000x1000x904x300kg30050100--20
ETAI61000x1000x904x500kg600100200100-20050
ETAI151000x1000x904x1000kg1500200500200-500100
ETMI31000x1250x904x300kg30050100--20
ETMI61000x1250x904x500kg600100200100-20050
ETMI151000x1250x904x1000kg1500200500200-500100
ETBI31250x1250x904x300kg30050100--20
ETBI61250x1250x904x500kg600100200100-20050
ETBI151250x1250x904x1000kg1500200500200-500100
ETBI301250x1250x904x2000kg30005001000500-1000200
ETDI61250x1500x1154x500kg600100200100-20050
ETDI151250x1500x1154x1000kg1500200500200-500100
ETDI301250x1500x1154x2000kg30005001000500-1000200
ETEI61500x1500x1154x500kg600100200100-20050
ETEI151500x1500x1154x1000kg1500200500200-500100
ETEI301500x1500x1154x2000kg30005001000500-1000200
ETFI61500x2000x1304x500kg600100200100-20050
ETFI151500x2000x1304x1000kg1500200500200-500100
ETFI301500x2000x1304x2000kg30005001000500-1000200
ETGI60-11500x2000x1804x3000kg6000100020001000-2000500
ETHI301500x2500x1804x3000kg30005001000--200
ETHI601500x2500x1804x3000kg6000100020001000-2000500
ETLI302000x2500x1804x3000kg30005001000--200
ETLI602000x2500x1804x3000kg6000100020001000-2000500
ETLI1002000x2500x1804x4500kg10000200050002000-50001000
WARNING: ETFI, ETGI, ETHI, ETLI models require special transportation with quoted price.
(g)* : Divisions obtainable only with the relative options, in combination with Dini Argeo weight indicator.
IP69K Protection
 CodeDescription
IP69KLC IP69K version for one loadcell.
IP68 protection
 CodeDescription
ETIP68 IP68 connection fitted with specific cable, fairleads and connectors.
Calibration service with weight indicator
 CodeDescription
DINICAL Connection to a Dini Argeo indicator and calibration. NET PRICE (*).
DINICAL-DRC Direct connection (without connectors) from platform to indicator and calibration service. € NET.
NOTE(1): delivered platform not connected: connection of the platform to the weight indicator to be carried out on site by qualified personnel.
Legal for trade approval , class III or IIII, with Dini Argeo indicator (only at time of order)
 CodeDescription
ECEM 3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEM2 Multi-range 3000+3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEMDOC Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €.
High resolution (d HR)(only at time of order)
 CodeDescription
ETHR High resolution model for internal factory use.
Floor columns
 CodeDescription
KWR10 Kit of 4 rubber wheels and galvanized steel frame for CSP column. A pair of idler wheels and a pair with brakes.
CSP38I-1 AISI 304 stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38 Stainless steel column 450x450mm, h=917, Ø 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38D Stainless steel column 350x350mm, h=750mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Frame for flush floor installation
 CodeDescription
ETATFI Stainless steel frame for flush floor installation for ETAI platforms.
ETMTFI Stainless steel frame for flush floor installation for ETMI platforms.
ETBTFI Stainless steel frame for flush floor installation for ETBI platforms.
ETDTFI Stainless steel frame for flush floor installation for ETDI platforms.
ETETFI Stainless steel frame for flush floor installation for ETEI platforms.
ETFTFI Stainless steel frame for flush floor installation for ETFI platforms.
ETHTFI Stainless steel frame for flush floor installation for ETHI platforms.
ETLTFI Stainless steel frame for flush floor installation for ETLI platforms.
ETKB Ball joints kit in stainless steel for pit frame ETxTF and ETxTFI. This accessory can be used in substitution of the standard plates. It allows the platform to swing and to settle, improving the weighing performance. Compatible with platforms with load cells up to 2000 kg.
On/Off ramp
 CodeDescription
ETARI Stainless steel ramp, 1000x900mm, for ETAI and ETMI platforms.
ETBRI Stainless steel ramp, 1250x900mm, for ETBI platforms.
ETDRI Stainless steel ramp, 1250x1100mm, for ETDI platforms.
ETERI Stainless steel ramp, 1500x1100mm, for ETEI platforms.
ALWAYS MAKE SURE THAT THE RESULTING INCLINATION OF THE RAMP IS COMPATIBLE WITH THE SPECIFICATIONS OF THE VEHICLES USED FOR LOADING AND UNLOADING.
ALSO PROTECT THE PLATFORM SIDES BY MOUNTING, WHERE NECESSARY, APPROPRIATE ANGULAR PROTECTION PIECES (GUARD RAILS)
Options for ATEX version
 CodeDescription
EXCB6(S6) Blue shielded cable 6x0.22 mm², only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 °C. Minimum bending radius >/= 7 x O.D. €/m
CCATEX-1 Optional ATEX version for single load cell. Marking: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga and ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
CCATEX3GD ATEX certificate for each load cell. Marking: ATEX II 3G Ex nA IIC T6 Gc for gas and ATEX II 3D Ex tc IIIC T115°C Dc IP65 for dusts. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR and IT).
JB4QA ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
JB4QAI ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
DCATEXMECH ATEX version for the PLATFORM / LOAD CELL MOUNTING KIT for zone 1/21 (for the load cells ATEX declaration see CCATEX code). Option to be offered only if the platform is ordered without the indicator, otherwise refer to the available certifications for the chosen weight indicator. Provided with safety instructions and ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
Plates for fixing on the floor
 CodeDescription
ETPFI-1 Kit of 4 plates for fixing on the floor, in stainless steel. For platforms ETG, ETH, ETL, ETA, ETM, ETB, ETD, ETE, ETF, LPI and FL series.
Protection for junction box/electronic circuits
 CodeDescription
GELBOX(S1) Anti condensation, insulating, and sealing gel. Useful to protect the electronic circuits of the weighing system, even under prolonged immersions conditions. Pack of 300ml.
WARNING:
For JB4Q, JB4QA, JBxQI and JBxQAI: 300ml of gel required
Calibration service with Dini Argeo indicator (only at time of order)
 CodeDescription
CT5 ISO 17025 calibration certificate from 61 to 300 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT6 ISO 17025 calibration certificate from 301 to 1500 kg for single scale/platform. For precision and industrial scales, crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CT7 ISO 17025 calibration certificate from 1501 to 3000 kg for single scale/platform. For precision balances, industrial and crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CD3 ISO 9001 DINI ARGEO calibration report, from 1501 to 6000 kg, for single scale/platform. ACCREDIA reference weights.
CD4 ISO 9001 DINI ARGEO calibration report, from 6001 to 15000kg, for single scale/platform. ACCREDIA reference weights.

Pdf product page All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS