|
Weight indicators Ex





3590E "ENTERPRISE" 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES


  3590E "ENTERPRISE" 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES
 

3590E3GD: weight indicator for advanced applications in ATEX zones

I/O SECTION
  • Two RS232 serial ports, for connection to printer (in safety zone), PC or PLC.
  • One RS232/RS485 serial port, for connection to printer (in safety zone), PC or PLC.
  • 4 optoisolated outputs (16 in the IO versions).
  • 2 optoisolated inputs (8 in the IO versions).
  • Profibus interface to install in safety zone (available upon request for E-AF01 and E-BATCH1 versions).
  • Analogue output with D/A converter at 16 bit, 0-10Vdc, 0-20mA, 4-20mA (available upon request for the IO versions).
Weight indicator for ATEX areas classified at risk of explosion with protection methods according to
ATEX II 3G Ex nR IIC T6 Gc X for gases
ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust.
The wide range of available software program guarantees the maximum versatility. Completely programmable printouts and fitted with alibi memory. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • 25-key alphanumerical waterproof keyboard.
  • Highly efficient red LED display with 6 digits 15mm high.
  • Backlit LCD graphic 25x100mm display.
  • Synoptic bar graph with 16 bright LEDs showing the active functions.
  • Easy to clean STAINLESS STEEL waterproof IP68 enclosure; resistant to harsh and corrosive environments.
  • Dimensions: 264x115x174 mm.
  • Suitable for use on the table, column, or wall.
  • Real time clock and permanent data storage.
  • Fitted with alibi memory, integrated on the motherboard.
  • Functions available with DINITOOLS utility
    - Configuration, calibration, data entry and print formatting.
    - Recording and filing of all the information on PC.
    - Complete retrieval of the saved data for quick replacement.
    - Instrument calibration with numeric values.
  • Selection of the programme language directly in the set-up.
  • 24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points.
  • Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade.
  • Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points.
  • 110-240 Vac power supply.
  • Management of up to 4 independent scales (up to 2 for the AF03 version).
  • Connectable with up to 16 analogue 350-Ohm (or 45 1000-Ohm) load cells.
  • Connectable to printers and labellers with the command drivers.

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R51 - MID
  • OIML R134 (AF09)
DOWNLOAD
Available versions
 CodeDescription
3590EXT01BC3GD ATEX 3GD indicator with AF01 software. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
3590EXT01BCIO3GD ATEX 3GD indicator with AF01 software, 16 outputs and 8 inputs. Stainless steel IP68 case, 25-key keypad, LED display and backlit graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
3590EXT03BC3GD ATEX 3GD indicator with AF03 software. Stainless steel IP68 case, 25-key keypad, LED display and LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
3590EXTBATCH1BC3GD ATEX 3GD indicator with BATCH1 software. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
3590EXTBATCHBCIO3GD ATEX 3GD indicator with BATCH software, 16 outputs and 8 inputs. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
Software for compiling the databases
 CodeDescription
DBM PC software for the quick compiling of the databases. For 3590Exx and CPWExx instruments.
Junction Box / Boards - Load Cell cables
 CodeDescription
JB4QA ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
JB4QAI Stainless steel IP66, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
LCCB Shielded 6x0,25 mm² cable (suitable for Ex zones). €/m
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
Legal for trade approval
 CodeDescription
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.
Optional power supply cords
 CodeDescription
EXACB3(S6) Armoured 3x0,5mm² cable, for ATEX zones. €/m
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
ATEX battery and battery charger
 CodeDescription
BP6ESTATEX3GD IP65 stainless steel, external ATEX battery pack, for 2 and 22 zones. For Dini Argeo ATEX 3GD instruments. ATTENTION: rechargeable in safe zone only, connectable and disconnectable from the weighing system also in hazardous area.
BP6CB Battery charger for safe area, for BP6ESTATEX3GD ATEX battery.
BTCB3GD Cable for BP6ESTATEX3GD battery connection.
Declaration of ATEX conformity
 CodeDescription
DCATEX3590E3GD Declaration of ATEX conformity of whole. Ex II 3GD IIC T6 T135°C X system, with relative label of whole system, for Dini Argeo 3590E3GD ATEX weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
Storing the weighs (only at time of order)
 CodeDescription
SWM WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales (price of a license for a single scale management).
Communication Interfaces
 CodeDescription
OBRF3GD-2(S6) 868 MHz radio frequency module for ATEX 2 & 22 zones. ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
OBWIFI3GD-2 WIFI module for ATEX zones, with ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 30m indoors, 70m outdoors.
Connection cables
 CodeDescription
RSCBTW Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
Digital Input/Output
 CodeDescription
DAC16O(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.
Printers/Labellers for safe zones
 CodeDescription
OBTPRB(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
LP542S(S1) Direct termal labeller.
LP542TT(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
SMTPLUSPRO(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
PRNSERV Custom-made ticket (up to 4 layouts). NET price.
APRNSERV Custom-made label (up to 4 layouts). NET price.
Columns, supports brackets, visors
 CodeDescription
STFI-1 Stainless steel fixing bracket. For mounting the weight indicator on wall.
STFR-1 Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
STFA12 Stainless steel bracket for mounting the ATEX battery on column. Compatible with "DFWBP76ATEX..", "BP6ESTATEX3GD.." and "BP6V12A".
CSP38I-1 Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Zener barriers for load cells
 CodeDescription
ZBA1S Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a hazardous-proof case. Marking: ATEX II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC.
KZBA ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in an explosive zone. Dimensions 180x180x150mm.Can connect up to 4 Load Cell of 350 Ohm. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +50°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +50°C) for dust.
KMB4 Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.
PG cable glands
 CodeDescription
PG7EX 10 PG7 metallic cable gland set for ATEX indicators.
PG9EX 10 PG9 metallic cable gland set for ATEX indicators.
Other options
 CodeDescription
TECSUP Technical assistance by telephone. NET Hourly price.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS