|
Weight indicators Ex





3590EGT 3GD "TOUCH" : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES


  3590EGT 3GD "TOUCH" : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES
 

3590EGTC3GD: Stainless steel weight indicator with colour touch screen display.



QWERTY keyboard integrated into the Touch Screen display.

I/O SECTION
  • Two RS232 serial ports, for connection to printer, radio module, PC or PLC, badge reader or remote scale.
  • One RS485/RS232 serial port, for connection to printer, PC, PLC, or digital load cells.
  • 4 optoisolated outputs, up to 16 with optional board.
  • 2 optoisolated inputs, up to 8 with optional board.
  • Profibus interface to install in safety zone.
  • Analog output DAC16O needs the expansion board IOEXPB and it's only compatible to a bench mounting.
Weight indicator with a big touch screen display, for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to
ATEX II 3G Ex nR IIB T6 Gc X for gases
ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, it's fitted with 3 serial ports, configurable printouts and integrated alibi memory. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • 5,7' colour touch screen display
  • Multilanguage software
  • 15-key alphanumerical waterproof keyboard
  • 3-way control light
  • Selectable QWERTY, AZERTY o QWERTZ keyboard integrated in the touch screen
  • Stainless steel waterproof enclosure, with new IP68 protection system
  • Dimensions: 280x143x185mm
  • Suitable for use on the table, column or wall
  • Real time clock and permanent data storage
  • Fitted alibi memory, integrated on the motherboard
  • Slot for built-in micro SD for recording the configuration, logos, and customized screens (upon request)
  • Functions available with DINITOOLS utility
    - Configuration, data entry and print formatting
    - Recording and filing of all the information on PC
    - Complete retrieval of the configuration
    - Instrument calibration with numeric values
    - Customization of the screens
  • 24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points
  • 4 independent analogue channels for reading of the weight
  • Connection with up to 16 analogue load cells of 350 Ohm (45 load cells of 1000 Ohm)
  • Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade
  • Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points
  • Connectable to printers and labellers with free programmation of the printout formats
  • Power supply from 110-240Vac line or external rechargeable battery (recharge in safety zone).

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R51 - MID
  • OIML R134 (AF09)
DOWNLOAD
Available versions
 CodeDescription
3590EGTC3GD Colour Touch Screen indicator, ATEX 3GD, with AF01 software. Stainless steel waterproof IP68 case. Protection degree: ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
Available firmwares
 CodeDescription
AF01 Software for totalization and formula weighing.
AF02 Software for pieces/quantity counting.
AF03GT Software for weighbridges, input/output vehicle. For 3590 "TOUCH SCREEN" weight indicators
AF04 Software for statistical checking of prepackaged goods.
AF04GT Software for statistical checking of prepackaged goods.
AF05 Software for price compunting and industrial labelling.
AF08 Software for static wheel and axle weighing with 2 or various platforms.
AF09 Software for dynamic and static axle weighing with 2 platforms.
BATCH1 Software for single product dosage systems in loading and unloading.
BATCH Software for multicomponent dosage systems in loading and unloading. TAKE NOTE: For 3590, only with IOEXPB optional board.
Software for compiling the databases
 CodeDescription
DBM PC software for the quick compiling of the databases. For 3590Exx and CPWExx instruments.
Junction Box / Boards - Load Cell cables
 CodeDescription
3590E4CH(S1) Built-in board for multiple quick scale connection.
JB4QA ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
JB4QAI Stainless steel IP66, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
LCCB Shielded 6x0,25 mm² cable (suitable for Ex zones). €/m
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
Approval
 CodeDescription
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.
Optional power supply cords
 CodeDescription
EXACB3(S6) Armoured 3x0,5mm² cable, for ATEX zones. €/m
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
ATEX battery and battery charger
 CodeDescription
BP6ESTATEX3GD IP65 stainless steel, external ATEX battery pack, for 2 and 22 zones. For Dini Argeo ATEX 3GD instruments. ATTENTION: rechargeable in safe zone only, connectable and disconnectable from the weighing system also in hazardous area.
BTCB3GD Cable for BP6ESTATEX3GD battery connection.
BP6CB Battery charger for safe area, for BP6ESTATEX3GD ATEX battery.
Declaration of ATEX conformity
 CodeDescription
DCATEX3590E3GD Declaration of ATEX conformity of whole. Ex II 3GD IIC T6 T135°C X system, with relative label of whole system, for Dini Argeo 3590E3GD ATEX weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
Storing the weighs (only at time of order)
 CodeDescription
SWM WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales (price of a license for a single scale management).
Communication interfaces (only at time of order)
 CodeDescription
OBRF3GD-2(S6) 868 MHz radio frequency module for ATEX 2 & 22 zones. ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
RS485C(S1) Built-in RS485 interface (mounting and cable gland excluded).
RS485OPTO(S1) Built-in optoisolated RS485 interface (mounting, cable gland excluded).
OBWIFI3GD-2 WIFI module for ATEX zones, with ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 30m indoors, 70m outdoors.
Digital Input/Output
 CodeDescription
DAC16O(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.
IOEXPB(S1) Built-in board with 12 OUT and 6 IN (mounting and cable gland excluded). It includes expansion circuit of the power supply range of the indicator (8-40Vdc). NOT COMPATIBLE WITH 3590E4CH AND TPRXT.
Printers/Labellers for safe zones
 CodeDescription
OBTPRB(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
LP542S(S1) Direct termal labeller.
LP542TT(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
SMTPLUSPRO(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
PRNSERV Custom-made ticket (up to 4 layouts). NET price.
APRNSERV Custom-made label (up to 4 layouts). NET price.
Connection cables
 CodeDescription
RSCBTW Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length
TAKE NOTE:
All the cables must be installed and protected according to the standards for electrical equipment.
Columns and supports
 CodeDescription
STFI-1 Stainless steel fixing bracket. For mounting the weight indicator on wall.
STFR-1 Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
CSP38I-1 Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
STFA12 Stainless steel bracket for mounting the ATEX battery on column. Compatible with "DFWBP76ATEX..", "BP6ESTATEX3GD.." and "BP6V12A".
Zener barriers for load cells
 CodeDescription
ZBA1S Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a hazardous-proof case. Marking: ATEX II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC.
KZBA ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in an explosive zone. Dimensions 180x180x150mm.Can connect up to 4 Load Cell of 350 Ohm. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +50°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +50°C) for dust.
KMB4 Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.
PG cable glands
 CodeDescription
PG7EX 10 PG7 metallic cable gland set for ATEX indicators.
PG9EX 10 PG9 metallic cable gland set for ATEX indicators.
Other options
 CodeDescription
TECSUP Technical assistance by telephone. NET Hourly price.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS