|
Pads





"WWSD" 900 x 500mm WHEEL WEIGHING PADS


  "WWSD" 900 x 500mm WHEEL WEIGHING PADS
 

Pads designed to create weighing stations for large sized vehicles fitted with twinned wheels or large sized tyres (articulated lorries, tractor-trailers, building yard vehicles, etc.); fitted with integrated wheels for easy transport and positioning. Particularly suitable for dynamic weighing.

FEATURES

  • Pan dimensions: 900x500mm
  • Weighing area: 750x415mm
  • Overall dimensions: see technical drawing
  • Weight: approximately 41,5kg.
  • Dual handle for easy handling.
  • Fitted with wheels for pad transport.
  • Sturdy structure, made in special aluminium, which guarantees lightness and makes these suitable also for harsh working conditions.
  • 10 m PUR cable, with IP68 connector on platform side and new M12 connector on weight indicator side.
  • IP68 stainless steel load cells.
  • Hermetic junction box with IP68 protection rate.
  • Special vulcanised nonslip rubber applied under the pad for good grip on all surfaces.
  • Extremely simple and reliable connection of the scale to the weight indicator.
  • Available in legal for trade approved version.
  • Available in high resolution version.
  • Available upon price estimate in Atex version for 1&21 e 2&22 zones.

LEGAL FOR TRADE APPROVED VERSIONS

  • The pads are for legal for trade use:
    - In the single-pad systems, not used to weigh vehicles.
    - In the wheel weighing systems in which the number of pads is equal to the number of vehicle wheels.
    - In the axle weighing systems composed of one or more multiples of WWS pads, except possible limitations of use for some European States.

  • The axle weighing systems with 2 WWS pads and a 3590E "AF09" weight indicator are OIML R134 certified for the dynamic vehicle weighing, according to the legal standards in force in the Country of use.

  • The CE-M legal for trade divisions indicated in the "version" table are available with ECEM option. ECEM option is needed for each legal for trade pad of the system.

  • Legal for trade systems with more than one WWS, are fitted with the approval of the weight sum and related division:
    Exemple for a 4 pads system
    Single CE-M Pad: Max=1500kg and e=0,5kg
    CE-M SUM: Max=6000kg and e=2kg



     AXLE WEIGHING SYSTEM INSTALLATION:


DOWNLOAD
Available versions
 
Code
l x w x h
(mm)
Max
(kg)
d
(kg)

(kg)
d HR
(kg)*
Notes
WWSD6T-2900x500x586000220,2Price for single platform
WWSD10T-2900x500x5810000550,5Price for single platform
WWSD15T-2900x500x5815000550,5Price for single platform
WWSD20T-2900x500x5820000 (15000**)10101Price for single platform
(*) These divisions are obtainable only with the relative options
(**) With ECEM legal for trade approval , Max=15000kg
Legal for trade approval (only at time of order)
 CodeDescription
ECEM 3000e legal for trade approval, for single platform/scale. NOTE: Depending on the product, the ECEM approval service may require DINICAL calibration service. Check to see if DINICAL is in the product options.
ECEMDOC Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET €.
High resolution (d HR)(only at time of order)
 CodeDescription
EHR High resolution model for internal factory use.
Frame for flush floor installation
 CodeDescription
WWSDTF Frame for flush floor installation. For WWSD pad.
Spare part cable
 CodeDescription
CBWWSOVN 10m connection cable for WWS pads (as a spare part), with MIL connector pad side and new M12 connector indicator side.
On/Off ramp
 CodeDescription
WWSDR Single aluminium ramp for WWSD and WWSF. Dimensions 900x150x30mm.
"Easy level" kit
 CodeDescription
LMDK18 "Easy Level" kit, for WWSD. Consisting of 20 levelling modules and 4 ramps.
Main connactable indicators
 CodeDescription
DFWKRP-3 For analogue WWS (WWS...-y) only. Indicator with transport case and integrated printer. Fitted with specific programme for vehicle weighing, 17-key keypad, backlit display and time/date. Available only in combination with Dini Argeo vehicle weighing systems (WWS, RWS, DTW, WBSA series).
3590EKR-3 For analogue WWS (WWS...-y) only. Indicator with transport case, printer and AF09 software. 25-key keypad, LED display and backlit graphic LCD display. Available only in combination with Dini Argeo vehicle weighing systems (WWS, RWS, DTW, WBSA series).
3590ETKR-3 For analogue WWS (WWS...-y) only. Touch screen indicator in transport case with printer, AF08 software. Colour display. Available only in combination with Dini Argeo vehicle weighing systems (WWS, RWS, DTW, WBSA series).
AF03 Software for weighbridges, input/output vehicle. For 3590 and CPW weight indicators.
AF08 Software for static wheel and axle weighing with 2 or more pads.
AF09 Software for dynamic and static axle weighing with 1 or 2 pads.
Calibration service with Dini Argeo indicator (only at time of order)
 CodeDescription
CT8 ISO 17025 calibration certificate from 3001 to 6000 kg for single scale/platform. For precision balances, industrial and crane scales. The certificate is provided in digital format (pdf) and sent by e-mail.
CD3 ISO 9001 DINI ARGEO calibration report, from 1501 to 6000 kg, for single scale/platform. ACCREDIA reference weights.
CD4 ISO 9001 DINI ARGEO calibration report, from 6001 to 15000kg, for single scale/platform. ACCREDIA reference weights.

Pdf product page All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS