|
Kit for assembling weighbridges





"WKPT - C3": ANALOGUE KIT FOR WEIGHBRIDGES WITH TOUCH-SCREEN INDICATOR


  "WKPT - C3": ANALOGUE KIT FOR WEIGHBRIDGES WITH TOUCH-SCREEN INDICATOR
 

"3590ET" INDICATOR
  • Touch screen, graphic, color display.
  • ABS waterproof IP65 case.
  • Integrated alibi memory for CE-M approved communication with printer and PC.
  • 3 serial ports, 2 RS232 and 1 RS485 for connection to printer, repeater and PC.
  • 2 inputs and 4 outputs.
  • "AF03" application software suitable for vehicles weighing and weighbridges management, with input/output products check.

    To view the full technical data sheet click HERE.
"JB10Q" JUCTION BOX
  • Junction box with polyester case.
  • IP66 protection degree or IP68 with the use of GELBOX anti condensation gel (optional, you need 1200ml of gel).
  • Surge Arresters against electric discharges and disturbances.

    To view the full technical data sheet click HERE.
Analogue weighbridges kit made up of 3590ET touch screen weight indicator with AF03 software for weighbridges, 8 stainless steel IP68 "RCPT" analogue load cells, complete with galvanized steel oscillating resting joints and junction box with surge arresters.

Touch screen indicator, specific for weigh bridge.

Junction box with removable terminals and integrated surge arres.

ANALOGUE load cells in stainless/nickel-plated steel.

TOTAL CAPACITY: 240t (8 x 30t cells).


OIML R60. C3 precision class.

Load cell height 200mm (including cups height).
LOAD CELLS: 18m CONNECTION CABLE.

"RCPT" ANALOGUE LOAD CELLS

  • Minimum load cell verification interval: Vmin = EMax / 10.000
  • Maximum number of load cell divisions: nLC = 3000 (C3)
  • Sensitivity: 2mV/V +/- 0,1%
  • Temperature effect on full scale: 0,002% /°C
  • Temperature effect on zero: 0,002% /°C
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -30°C/+70°C
  • Creep error after 30 minutes: 0,02% F.S.
  • Excitation voltage from 5 to 15 VDC
  • Input Resistance: 700 ± 20 Ohm
  • Output Resistance: 703 ± 7 Ohm
  • Zero Balance: +/-1% F.S.
  • Insulation Resistance: 5000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 250% F.S.
  • 4-wire shielded cable, 14m long, 5mm diameter.

    To view the full technical data sheet click HERE.
DOWNLOAD
Available versions
 CodeDescription
WKPT830A Kit for ANALOGUE weightbridges with 8 load cells. Composed of 3590ET indicator fitted with AF03 software, 2 inputs, 4 outputs and RS485 port, 8 RCPT30C3 analogue load cells with mounting kit, and JB10Q equalisation box with 10 inputs.
Legal for trade approval
 CodeDescription
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.
Protection for junction box/electronic circuits
 CodeDescription
GELBOX(S1) Anti condensation, insulating, and sealing gel. Useful for the protection of the electronic circuits of the weighing system, even in conditions of prolonged immersions in time. Pack of 300ml.
WARNING:
For JB10Q/JB10QD: 1200ml of gel required
Connection cables
 CodeDescription
LCCB Shielded 6x0,25 mm² cable (suitable for Ex zones). €/m
Communication Interfaces
 CodeDescription
OBRF-2(S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRFUSB-3 External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
WIFITD-1(S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.
ETHD(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
RS485OPTO(S1) Built-in optoisolated RS485 interface (mounting, cable gland excluded).
Weight repeaters
 CodeDescription
GLR100 RS485 alphanumeric repeater with 110 mm multicolour LED display
DGT100R-1 Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.
Printers/Labellers
 CodeDescription
OBTPRB(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
PR80(S1) Thermal printer with print cutter.
TM295(S1) Dot matrix impact printer.
LX300PRO(S1) Dot matrix impact printer.
PRNSERV Custom-made ticket (up to 4 layouts). NET price.
APRNSERV Custom-made label (up to 4 layouts). NET price.

All the specifications and images can be subject to variations and upgrades without prior notice.
ASSISTANCE
DOCUMENTS
SALES NETWORK
CATALOGS