FXD SERIES BENDING BEAM LOAD CELLS

	FXD SERIES BENDING BEAM LOAD CELLS

Dimensions (mm)

Wiring Code
Colour	Function
--	SHIELD
GREEN	OUTPUT +
RED	INPUT +
WHITE	OUTPUT -
BLACK	INPUT -

Bending beam load cells for approved weighing (capacities from 100kg to 500kg), automatic systems, dosage.
CAPACITIES (kg): 10, 20 , 50, 100, 200, 300, 500.
OIML R60. C3 precision class.
Stainless steel. IP68 protection.

MAIN FEATURES

C3 PRECISION CLASS
STAINLESS STEEL
IP68 PROTECTION
MAX. CAPACITIES FROM 10 TO 500 kg
SHIELDED CONNECTION CABLE
OIML CERTIFICATE AVAILABLE UPON REQUEST
TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

Minimum load cell verification interval: Vmin = EMax / 10.000
Maximum number of verification intervals: nLC= 3000
Full Scale Output: 2.0 ± 0,002mV/V
Combined error: 0,017% of Full Scale Output (F.S.)
Non-Repeatability: 0,015% F.S.
Temperature effect on zero: +/- 0,02% F.S. / 10°C
Temperature effect on full scale output: +/- 0,02% F.S. / 10°C
Compensated Temperature Range: –10°C/+40°C
Operating Temperature Range: –30°C/+70°C
Creep error after 30 minutes +/- 0,016% F.S.
Maximum tolerated excitation voltage: 15 VDC
Input Resistance: 400 ± 20 Ohm
Output Resistance: 352 ± 3 Ohm
Insulation Resistance: > 5000 MOhm
Safe Overload: 120% F.S.
Ultimate Overload: 150% F.S.
Nominal displacement: < 0,4 mm
4-wire shielded cable, 3m long, 5mm diameter.

ATEX VERSION

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.

DOWNLOAD

ATEX_2GD_FAQ.pdf

FXD.zip

Available versions

	Code	Max (kg)
	FXD10	10
	FXD20	20
	FXD50	50
	FXD100	100
	FXD200	200
	FXD300	300
	FXD500	500

Elastic joints

	Code	Description
	AVM8	Steel/rubber M8 elastic joint for FXC/FXD cells up to 500kg.

Assembly kits

	Code	Description
	KFXDN	Stainless steel kit for assembling 1 FXC/FXD cell up to 500kg. (Load cell not included)

Connection cables

	Code	Description
	LCCB	Shielded 6x0,25 mm² cable (suitable for Ex zones). €/m
	LCCBM	Shielded 4x0,34 mm² cable for moving applications. €/m
	PRCB	Protection sheathing for shielded cable. €/meter

Junction Boxes

	Code	Description
	JB4Q	Equalisation box for connection with up to 4 load cells. ABS box, IP67 protection rating, with 4 + 1 fairleads.
	JB4QI	Stainless steel equalisation box for connection with up to 4 load cells. IP65 protection rating, with 4 + 1 fairleads.
	JC4Q	Equalisation board for up to 4 cells. With UL marked PCB, Terminal block, plastic box and labels (if expected).

Available weight indicator/transmitter

	Code	Description
	DGT1S	Weight transmitter on DIN bar, with 2 INPUTS and 2 OUTPUTS. Fitted with 5-key keypad and LED display. Multifunction weighing program.
	DGT1	Weight transmitter for DIN bar. 5-key keypad, LED display, date/time, alibi memory, and multifunction weighing program.
	DGT4	Transmitter for DIN bar with 4 channels, 2 IN and 2 OUT. 5-key keypad, LED display, and standard weighing program.
	DGTQ	Transmitter for panel mounting, with 2 IN and 2 OUT. 5-key keypad, LED display, and standard weighing program.

Options for ATEX version

	Code	Description
	ZBA1S	Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a flame-proof case. Marking: ATEX/IECEx II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
	KZBA-1	ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in a dangerous zone. Dimensions 179x359x166,5mm. It can connect up to 4 350 Ohm load cells. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc X for gas, ATEX II 3(1)D Ex tc [ia Da] IIIC T135°C Dc IP66 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
	JB4QAI	ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
	JB4QA	ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
	EXCB6	(S6) Shielded, blue, 6x0,22mm² cable, for EX i (2GD) applications. €/m
	KMB4-1	Kit of 3 ATEX Zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in a dangerous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
	CCATEX-1	Optional ATEX version for single load cell. Marking: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga and ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
	DCATEXMECH	ATEX version for the PLATFORM / LOAD CELL MOUNTING KIT (for the load cells ATEX declaration see CCATEX code). Option to be offered only if the platform is ordered without the indicator, otherwise refer to the available certifications for the chosen weight indicator. Provided with safety instructions and ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
	DCATEXMB4	ATEX declaration for the whole system with Dini Argeo Zener barriers. Ex II 2G IIC T6 Gb X e Ex II 2D IIIC T125°C Db X system, with label of the whole system, for weight indicator connected to Dini Argeo zener barriers, connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). Provided with descriptive document of the assembly and ATEX EU declaration of conformity of the assembly (EN and IT).